网站标志
新闻详情
 
当前位置
石油螺纹单项量仪——美国Gagemaker
作者：管理员    发布于：2015-12-08 11:25:50    文字：【大】【中】【小】
摘要： 对于螺纹的检测，传统行业都是运用泰勒量规在控制整个螺纹的综合参数，而非单个参数进行检测，螺纹是复杂的三维立体机械造型，对于单个参数的测量显得比较繁琐。
  
MT-3000测长仪、校准台
  对于螺纹的检测，传统行业都是运用泰勒量规在控制整个螺纹的综合参数，而非单个参数进行检测，螺纹是复杂的三维立体机械造型，对于单个参数的测量显得比较繁琐。而在石油行业中，螺纹相对较大、不论是尺寸还是体积重量，因此需要一种便携式的螺纹测量仪，由此产生了螺纹测量仪，全世界也因此产生了一批生产螺纹量仪的厂价，包括美国石油螺纹单项仪制造商Gagemaker。螺纹量仪不仅可以准确控制产品质量，更能为生产保驾护航，提供数据，直观性强。以下是部分Gagemaker单项仪的名称与描述，欢迎前来咨询。
SBFS-1600 Flat Setting Standard, SBG, 1.600"
SBFS-1727 Flat Setting Standard, SBG, 1.727”
SBFS-1800 Flat Setting Standard, SBG, 1.800”
SBFS-2062 Flat Setting Standard, SBG, 2.062”
SBFS-2187 Flat Setting Standard, SBG, 2.187”
SBFS-2312 Flat Setting Standard, SBG, 2.312”
SBFS-2325 Flat Setting Standard, SBG, 2.325”
SBFS-2375 Flat Setting Standard, SBG, 2.375"
SBFS-2437 Flat Setting Standard, SBG, 2.437”
SBFS-2540 Flat Setting Standard, SBG, 2.540”
SBFS-2598 Flat Setting Standard, SBG, 2.598” 
SBFS-2680 Flat Setting Standard, SBG, 2.680” 
SBFS-2700 Flat Setting Standard, SBG, 2.700”
SBFS-2720 Flat Setting Standard, SBG, 2.720” 
SBFS-2736 Flat Setting Standard, SBG, 2.736”
SBFS-2900 Flat Setting Standard, SBG, 2.900”
SBFS-2980 Flat Setting Standard, SBG, 2.980”
SBFS-3080 Flat Setting Standard, SBG, 3.080”
SBFS-3150 Flat Setting Standard, SBG, 3.150” 
SBFS-3175 Flat Setting Standard, SBG, 3.175” 
SBFS-3245 Flat Setting Standard, SBG, 3.245”
SBFS-3260 Flat Setting Standard, SBG, 3.260”
SBFS-3303 Flat Setting Standard, SBG, 3.303” 
SBFS-3400 Flat Setting Standard, SBG, 3.400”
SBFS-3425 Flat Setting Standard, SBG, 3.425”
SBFS-3440 Flat Setting Standard, SBG, 3.440”
SBFS-3488 Flat Setting Standard, SBG, 3.488”
SBFS-3500 Flat Setting Standard, SBG, 3.500”
SBFS-3592 Flat Setting Standard, SBG, 3.592”
SBFS-3620 Flat Setting Standard, SBG, 3.620”
SBFS-3625 Flat Setting Standard, SBG, 3.625”
SBFS-3750 Flat Setting Standard, SBG, 3.750”
SBFS-3795 Flat Setting Standard, SBG, 3.795”
SBFS-3800 Flat Setting Standard, SBG, 3.800”
SBFS-3805 Flat Setting Standard, SBG, 3.805”
SBFS-3885 Flat Setting Standard, SBG, 3.885”
SBFS-3900 Flat Setting Standard, SBG, 3.900" 
SBFS-3976 Flat Setting Standard, SBG, 3.976”
SBFS-3980 Flat Setting Standard, SBG, 3.980”
SBFS-3985 Flat Setting Standard, SBG, 3.985”
SBFS-4000 Flat Setting Standard, SBG, 4.000”
SBFS-4160 Flat Setting Standard, SBG, 4.160”
SBFS-4165 Flat Setting Standard, SBG, 4.165”
SBFS-4250 Flat Setting Standard, SBG, 4.250”
SBFS-4343 Flat Setting Standard, SBG, 4.343”
SBFS-4346 Flat Setting Standard, SBG, 4.346”
SBFS-4370 Flat Setting Standard, SBG, 4.370” 
SBFS-4394 Flat Setting Standard, SBG, 4.394”
SBFS-4520 Flat Setting Standard, SBG, 4.520”
SBFS-4526 Flat Setting Standard, SBG, 4.526”
SBFS-4538 Flat Setting Standard, SBG, 4.538”
SBFS-4567 Flat Setting Standard, SBG, 4.567”
SBFS-4576 Flat Setting Standard, SBG, 4.576"
SBFS-4585 Flat Setting Standard, SBG, 4.585”
SBFS-4609 Flat Setting Standard, SBG, 4.609”
SBFS-4640 Flat Setting Standard, SBG, 4.640”
SBFS-4700 Flat Setting Standard, SBG, 4.700”
SBFS-4706 Flat Setting Standard, SBG, 4.706”
SBFS-4750 Flat Setting Standard, SBG, 4.750”
SBFS-4800 Flat Setting Standard, SBG, 4.800”
SBFS-4880 Flat Setting Standard, SBG, 4.880”
SBFS-4886 Flat Setting Standard, SBG, 4.886”
SBFS-4890 Flat Setting Standard, SBG, 4.890”
SBFS-4900 Flat Setting Standard, SBG, 4.900”
SBFS-5025 Flat Setting Standard, SBG, 5.025”
SBFS-5060 Flat Setting Standard, SBG, 5.060”
SBFS-5150 Flat Setting Standard, SBG, 5.150”
SBFS-5240 Flat Setting Standard, SBG, 5.240”
SBFS-5314 Flat Setting Standard, SBG, 5.314”
SBFS-5350 Flat Setting Standard, SBG, 5.350”
SBFS-5420 Flat Setting Standard, SBG, 5.420”
SBFS-5500 Flat Setting Standard, SBG, 5.500” 
SBFS-5600 Flat Setting Standard, SBG, 5.600”
SBFS-5750 Flat Setting Standard, SBG, 5.750”
SBFS-5780 Flat Setting Standard, SBG, 5.780”
SBFS-5850 Flat Setting Standard, SBG, 5.850”
SBFS-5960 Flat Setting Standard, SBG, 5.960”
SBFS-6050 Flat Setting Standard, SBG, 6.050”
SBFS-6140 Flat Setting Standard, SBG, 6.140”
SBFS-6250 Flat Setting Standard, SBG, 6.250”
SBFS-6320 Flat Setting Standard, SBG, 6.320”
SBFS-6375 Flat Setting Standard, SBG, 6.375”
SBFS-6500 Flat Setting Standard, SBG, 6.500”
SBFS-6600 Flat Setting Standard, SBG, 6.600”
SBFS-6680 Flat Setting Standard, SBG, 6.680”
SBFS-6750 Flat Setting Standard, SBG, 6.750”
SBFS-6860 Flat Setting Standard, SBG, 6.860”
SBFS-7040 Flat Setting Standard, SBG, 7.040”
SBFS-7220 Flat Setting Standard, SBG, 7.220”
SBFS-7375 Flat Setting Standard, SBG, 7.375”
SBFS-7450 Flat Setting Standard, SBG, 7.450”
SBG-0100E Electronic Stator Bore Package w/ CPU, 6 Shoes, and Standards, Range: 2.025"-6.80"
SBG-0100E-10FT Special 10' Wand Only, accuracy of +/- 0.003”
SBG-0100E-12FT Special 12' Wand Only, accuracy of +/- 0.003” 
SBG-0100E-6FT Wand Only for SBG-0100E, 6FT
SBG-0100E-8FT Special 8' Wand Only, accuracy of +/- 0.003”
SBG-034 SBG Setting Standard Base Plate
SBG-035 SBG Setting Standard Top Plate
SBG-037 SBG Setting Standard Threaded Rod
SBG13-2200 SBG-0100E 13" Gage Extension Assembly, range 2.200"-2.475"
SBG13-2325 SBG-0100E 13" Gage Extension Assembly, range 2.325"-2.600"
SBG13-2580 SBG-0100E 13" Gage Extension Assembly, range 2.580"-2.855"
SBG13-2825 SBG-0100E 13" Gage Extension Assembly, range 2.825"-3.100"
SBG13-3000 SBG-0100E 13" Gage Extension Assembly, range 3.000"-3.275"
SBG13-3175 SBG-0100E 13" Gage Extension Assembly, range 3.175"-3.450"
SBG13-3425 SBG-0100E 13" Gage Extension Assembly, range 3.425"-3.700"
SBG13-3585 SBG-0100E 13" Gage Extension Assembly, range 3.585"-3.860" 
SBG13-3795 SBG-0100E 13" Gage Extension Assembly, range 3.795"-4.070"
SBG13-4125 SBG-0100E 13" Gage Extension Assembly, range 4.125"-4.400"
SBG13-4375 SBG-0100E 13" Gage Extension Assembly, range 4.375"-4.650"
SBG13-4585 SBG-0100E 13" Gage Extension Assembly, range 4.585"-4.860"
SBG13-4800 SBG-0100E 13" Gage Extension Assembly, range 4.800"-5.075"
SBG13-5025 SBG-0100E 13" Gage Extension Assembly, range 5.025"-5.300"
SBG13-5200 SBG-0100E 13" Gage Extension Assembly, range 5.200"-5.475"
SBG13-5275 SBG-0100E 13" Gage Extension Assembly, range 5.275"-5.550"
SBG13-5425 SBG-0100E 13" Gage Extension Assembly, range 5.425"-5.700"
SBG13-5625 SBG-0100E 13" Gage Extension Assembly, range 5.625"-5.900"
SBG13-5925 SBG-0100E 13" Gage Extension Assembly, range 5.925"-6.200"
SBG13-6125 SBG-0100E 13" Gage Extension Assembly, range 6.125"-6.400"
SBG13-6350 SBG-0100E 13" Gage Extension Assembly, range 6.350"-6.625"
SBG13-6525 SBG-0100E 13" Gage Extension Assembly, range 6.525"-6.800"
SBG20-2200 SBG-0100E 20" Gage Extension Assembly, range 2.200"-2.475"
SBG20-2325 SBG-0100E 20" Gage Extension Assembly, range 2.325"-2.600"
SBG20-2580 SBG-0100E 20" Gage Extension Assembly, range 2.580"-2.855"
SBG20-2825 SBG-0100E 20" Gage Extension Assembly, range 2.825"-3.100"
SBG20-3000 SBG-0100E 20" Gage Extension Assembly, range 3.000"-3.275"
SBG20-3175 SBG-0100E 20" Gage Extension Assembly, range 3.175"-3.450"
SBG20-3425 SBG-0100E 20" Gage Extension Assembly, range 3.425"-3.700"
SBG20-3585 SBG-0100E 20" Gage Extension Assembly, range 3.585"-3.860"
SBG20-3795 SBG-0100E 20" Gage Extension Assembly, range 3.795"-4.070" 
SBG20-4125 SBG-0100E 20" Gage Extension Assembly, range 4.125"-4.400"
SBG20-4375 SBG-0100E 20" Gage Extension Assembly, range 4.375"-4.650"
SBG20-4585 SBG-0100E 20" Gage Extension Assembly, range 4.585"-4.860"
SBG20-4800 SBG-0100E 20" Gage Extension Assembly, range 4.800"-5.075"
SBG20-5025 SBG-0100E 20" Gage Extension Assembly, range 5.025"-5.300"
SBG20-5200 SBG-0100E 20" Gage Extension Assembly, range 5.200"-5.475"
SBG20-5275 SBG-0100E 20" Gage Extension Assembly, range 5.275"-5.550"
SBG20-5425 SBG-0100E 20" Gage Extension Assembly, range 5.425"-5.700"
SBG20-5625 SBG-0100E 20" Gage Extension Assembly, range 5.625"-5.900"
SBG20-5925 SBG-0100E 20" Gage Extension Assembly, range 5.925"-6.200"
SBG20-6125 SBG-0100E 20" Gage Extension Assembly, range 6.125"-6.400"
SBG20-6350 SBG-0100E 20" Gage Extension Assembly, range 6.350"-6.625"
SBG20-6525 SBG-0100E 20" Gage Extension Assembly, range 6.525"-6.800"
SBG28-2200 SBG-0100E 28" Gage Extension Assembly, range 2.200"-2.475"
SBG28-2325 SBG-0100E 28" Gage Extension Assembly, range 2.325"-2.600"
SBG28-2580 SBG-0100E 28" Gage Extension Assembly, range 2.580"-2.855"
SBG28-2825 SBG-0100E 28" Gage Extension Assembly, range 2.825"-3.100"
SBG28-3000 SBG-0100E 28" Gage Extension Assembly, range 3.000"-3.275"
SBG28-3175 SBG-0100E 28" Gage Extension Assembly, range 3.175"-3.450"
SBG28-3425 SBG-0100E 28" Gage Extension Assembly, range 3.425"-3.700"
SBG28-3585 SBG-0100E 28" Gage Extension Assembly, range 3.585"-3.860"
SBG28-3795 SBG-0100E 28" Gage Extension Assembly, range 3.795"-4.070" 
SBG28-4125 SBG-0100E 28" Gage Extension Assembly, range 4.125"-4.400"
SBG28-4375 SBG-0100E 28" Gage Extension Assembly, range 4.375"-4.650"
SBG28-4585 SBG-0100E 28" Gage Extension Assembly, range 4.585"-4.860"
SBG28-4800 SBG-0100E 28" Gage Extension Assembly, range 4.800"-5.075"
SBG28-5025 SBG-0100E 28" Gage Extension Assembly, range 5.025"-5.300"
SBG28-5200 SBG-0100E 28" Gage Extension Assembly, range 5.200"-5.475"
SBG28-5275 SBG-0100E 28" Gage Extension Assembly, range 5.275"-5.550"
SBG28-5425 SBG-0100E 28" Gage Extension Assembly, range 5.425"-5.700"
SBG28-5625 SBG-0100E 28" Gage Extension Assembly, range 5.625"-5.900"
SBG28-5925 SBG-0100E 28" Gage Extension Assembly, range 5.925"-6.200"
SBG28-6125 SBG-0100E 28" Gage Extension Assembly, range 6.125"-6.400"
SBG28-6350 SBG-0100E 28" Gage Extension Assembly, range 6.350"-6.625"
SBG28-6525 SBG-0100E 28" Gage Extension Assembly, range 6.525"-6.800"
SBG-5000A Stator bore gage, Range 1.500" -2.000", Analog Indicator, Head Length 8.350".  Includes 3 gage shoes
SBG-5000D Stator bore gage, Range 1.500"-1.650",  Head Length 8.350"
SBG-5000E Stator bore gage, Range 1.500"-1.650", Cabled remote DRO, Head Length 8.350"
SBG-5021D Digital Indicator Stator Bore Gage- Special 21" Head Length
SBG-5021E Electronic Stator Bore Gage- Special 21" Head Length
SBG-FSA flat setting stanard assembly includes base plate, top plate, threaded rod, and speed nut. Dwg # 3-0-449
SBG-GIB Interface box w/ computer.  Includes SBG Software for data collection
SBG-NUT Speed nut
SBRS-0805 Round Setting Standard, SBG, 0.805”
SBRS-0915 Round Setting Standard, SBG, 0.915”
SBRS-0980 Round Setting Standard, SBG, 0.980”
SBRS-1025 Round Setting Standard, SBG, 1.025”
SBRS-1094 Round Setting Standard, SBG, 1.094”
SBRS-1135 Round Setting Standard, SBG, 1.135”
SBRS-1245 Round Setting Standard, SBG, 1.245”
SBRS-1280 Round Setting Standard, SBG, 1.280”
SBRS-1355 Round Setting Standard, SBG, 1.355”
SBRS-1465 Round Setting Standard, SBG, 1.465”
SBRS-1562 Round Setting Standard, SBG, 1.562”
SBRS-1575 Round Setting Standard, SBG, 1.575”
SBRS-1687 Round Setting Standard, SBG, 1.687”
SBRS-1812 Round Setting Standard, SBG, 1.812”
SBRS-1925 Round Setting Standard, SBG, 1.925”
SBRS-1937 Round Setting Standard, SBG, 1.937”
SBRS-1960 Round Setting Standard, SBG, 1.960”
SBRS-2062 Round Setting Standard, SBG, 2.062”
SBRS-2187 Round Setting Standard, SBG, 2.187”
SBRS-2312 Round Setting Standard, SBG, 2.312”
SBRS-2437 Round Setting Standard, SBG, 2.437"
SBRS-2540 Round Setting Standard, SBG, 2.540”
SBRS-2720 Round Setting Standard, SBG, 2.720”
SBRS-2736 Round Setting Standard, SBG, 2.736”
SBRS-2900 Round Setting Standard, SBG, 2.900”
SBRS-2980 Round Setting Standard, SBG, 2.980”
SBRS-3080 Round Setting Standard, SBG, 3.080”
SBRS-3245 Round Setting Standard, SBG, 3.245”
SBRS-3260 Round Setting Standard, SBG, 3.260”
SBRS-3425 Round Setting Standard, SBG, 3.425”
SBRS-3440 Round Setting Standard, SBG, 3.440”
SBRS-3488 Round Setting Standard, SBG, 3.488”
SBRS-3592 Round Setting Standard, SBG, 3.592”
SBRS-3620 Round Setting Standard, SBG, 3.620”
SBRS-3625 Round Setting Standard, SBG, 3.625”
SBRS-3750 Round Setting Standard, SBG, 3.750”
SBRS-3800 Round Setting Standard, SBG, 3.800”
SBRS-3805 Round Setting Standard, SBG, 3.805”
SBRS-3885 Round Setting Standard, SBG, 3.885”
SBRS-3976 Round Setting Standard, SBG, 3.976”
SBRS-3980 Round Setting Standard, SBG, 3.980”
SBRS-3985 Round Setting Standard, SBG, 3.985”
SBRS-4160 Round Setting Standard, SBG, 4.160”
SBRS-4165 Round Setting Standard, SBG, 4.165”
SBRS-4343 Round Setting Standard, SBG, 4.343”
SBRS-4346 Round Setting Standard, SBG, 4.346”
SBRS-4394 Round Setting Standard, SBG, 4.343”
SBRS-4520 Round Setting Standard, SBG, 4.520”
SBRS-4526 Round Setting Standard, SBG, 4.526”
SBRS-4538 Round Setting Standard, SBG, 4.538”
SBRS-4609 Round Setting Standard, SBG, 4.609”
SBRS-4700 Round Setting Standard, SBG, 4.700”
SBRS-4706 Round Setting Standard, SBG, 4.706”
SBRS-4800 Round Setting Standard, SBG, 4.800”
SBRS-4880 Round Setting Standard, SBG, 4.880”
SBRS-4886 Round Setting Standard, SBG, 4.886”
SBRS-4890 Round Setting Standard, SBG, 4.890”
SBRS-5060 Round Setting Standard, SBG, 5.060”
SBRS-5240 Round Setting Standard, SBG, 5.240”
SBRS-5314 Round Setting Standard, SBG, 5.314”
SBRS-5420 Round Setting Standard, SBG, 5.420”
SBRS-5600 Round Setting Standard, SBG, 5.600”
SBRS-5780 Round Setting Standard, SBG, 5.780”
SBRS-5960 Round Setting Standard, SBG, 5.960”
SBRS-6140 Round Setting Standard, SBG, 6.140”
SBRS-6320 Round Setting Standard, SBG, 6.320”
SBRS-6500 Round Setting Standard, SBG, 6.500”
SBRS-6680 Round Setting Standard, SBG, 6.680”
SBRS-6860 Round Setting Standard, SBG, 6.860”
SBRS-7040 Round Setting Standard, SBG, 7.040”
SBRS-7220 Round Setting Standard, SBG, 7.220”
SCREW-1032BT #10-32x3/8" Brass Tipped set screw
SCREW-1420BT 1/4"-20x3/8" Brass Tipped set screw
SE-1000 Straight Edge
SES-1000 Replacement Straight Edge Standard
SG-8001 Saddle Gage
SG-8001-BB Brass Bushing
SG-8001-TA SG-8001 Tube Assembly
SG-8001-TB Transfer Beam
SL-H90 Thread Height Standard, SL-H90, 1.25 TPF, 3 TPI to be used with T072 pt.
SP-032 SPG-6000 Pitch Diameter Contact Point, 18 - 20 pitch/1 - 1.25mm pitch
SP-032T SPG-6000 Pitch Diameter Contact Point, 16 pitch, Truncated
SP-041 SPG-6000 Pitch Diameter Contact Point, 13 -16 pitch/1.5 - 2mm pitch
SP-041T SPG-6000 Pitch Diameter Contact Point, 12 - 14 pitch, Truncated
SP-050 SPG-6000 Pitch Diameter Contact Point, 11.5 - 12 pitch
SP-050T SPG-6000Pitch Diameter Contact Point, 10 pitch, Truncated
SP-057 SPG-6000 Pitch Diameter Contact Point, 10 pitch/2.5mm pitch
SP-062T SPG-6000 Pitch Diameter Contact Point, 8 pitch, Truncated
SP-072 SPG-6000 Pitch Diameter Contact Point, 8 - 9 pitch/3.5 - 3mm pitch
SP-090T SPG-6000 Pitch Diameter Contact Point, 6 pitch, Truncated
SP-096 SPG-6000 Pitch Diameter Contact Point, 6 - 7 pitch/4 - 4.25mm pitch
SP-105 SPG-6000 Pitch Diameter Contact Point, 5 pitch/4.5 - 4.75mm pitch
SP-105T SPG-6000 Pitch Diameter Contact Point, 5 pitch, Truncated
SPA-265 SPG-6000 Pitch Diameter Contact Point Arms, .265” dia., 1” long
SPA-375 SPG-6000 Pitch Diameter Contact Point Arms,.375” dia., 1.25” long
SPA-437 SPG-6000 Pitch Diameter Contact Point Arms,.437” dia., 1.50” long
Spec Long Form Cert Special Long Form Certificates
SPG-6000 Internal Thread Roll/Pitch Diameter Gage 5/8” to 1½”
SPG-Handle Handles for SPG-6000, 1 set of 2
SQ-1630 Squareness Gage, 36" total length of main "H" bar
SQ-1630HB Main "H" bar only for the SQ-1630
SQ-1636 Squareness Gage, 42" total length of main "H" bar
SQ-1636HB Main "H" bar only for the SQ-1636
SQ-PT-SLIDE Squareness Gage point slider
SRA-10P SPG-6000 ACME Thread Rolls, 10 pitch
SRA-11P SPG-6000 ACME Thread Rolls, 11 pitch
SRA-12P SPG-6000 ACME Thread Rolls, 12 pitch
SRA-13P SPG-6000 ACME Thread Rolls, 13 pitch
SRA-14P SPG-6000 ACME Thread Rolls, 14 pitch
SRA-16P SPG-6000 ACME Thread Rolls, 16 pitch
SRA-18P SPG-6000 ACME Thread Rolls, 18 pitch
SRA-4P SPG-6000 ACME Thread Rolls, 4 pitch
SRA-5P SPG-6000 ACME Thread Rolls, 5 pitch
SRA-6P SPG-6000 ACME Thread Rolls, 6 pitch
SRA-7P SPG-6000 ACME Thread Rolls, 7 pitch
SRA-8P SPG-6000 ACME Thread Rolls, 8 pitch
SRA-9P SPG-6000 ACME Thread Rolls, 9 pitch
SRMI-15P SPG-6000 ISO Metric Thread Rolls, 1.5mm pitch
SRMI-175P SPG-6000 ISO Metric Thread Rolls, 1.75mm pitch
SRMI-1P SPG-6000 ISO Metric Thread Rolls, 1mm pitch
SRMI-25P SPG-6000 ISO Metric Thread Rolls, 2.5mm pitch
SRMI-2P SPG-6000 ISO Metric Thread Rolls, 2mm pitch
SRMI-35P SPG-6000 ISO Metric Thread Rolls, 3.5mm pitch
SRMI-3P SPG-6000 ISO Metric Thread Rolls, 3mm pitch
SRMI-4P SPG-6000 ISO Metric Thread Rolls, 4mm pitch
SRSA-10P SPG-6000 Stub ACME Thread Rolls, 10 pitch
SRSA-11P SPG-6000 Stub ACME Thread Rolls, 11 pitch
SRSA-12P SPG-6000 Stub ACME Thread Rolls, 12 pitch
SRSA-13P SPG-6000 Stub ACME Thread Rolls, 13 pitch
SRSA-14P SPG-6000 Stub ACME Thread Rolls, 14 pitch
SRSA-16P SPG-6000 Stub ACME Thread Rolls, 16 pitch
SRSA-18P SPG-6000 Stub ACME Thread Rolls, 18 pitch
SRSA-4P SPG-6000 Stub ACME Thread Rolls, 4 pitch
SRSA-6P SPG-6000 Stub ACME Thread Rolls, 6 pitch
SRSA-7P SPG-6000 Stub ACME Thread Rolls, 7 pitch
SRSA-8P SPG-6000 Stub ACME Thread Rolls, 8 pitch
SRSA-9P SPG-6000 Stub ACME Thread Rolls, 9 pitch
SRVE-10P SPG-6000 UN Series Thread Rolls, 10 pitch external 60° “V”
SRVE-11P SPG-6000 UN Series Thread Rolls, 11 pitch external 60° “V”
SRVE-12P SPG-6000 UN Series Thread Rolls, 12 pitch external 60° “V”
SRVE-13P SPG-6000 UN Series Thread Rolls, 13 pitch external 60° “V”
SRVE-14P SPG-6000 UN Series Thread Rolls, 14 pitch external 60° “V”
SRVE-16P SPG-6000 UN Series Thread Rolls, 16 pitch external 60° “V”
SRVE-18P SPG-6000 UN Series Thread Rolls, 18 pitch external 60° “V”
SRVE-20P SPG-6000 UN Series Thread Rolls, 20 pitch external 60° “V”
SRVE-28P SPG-6000 UN Series Thread Rolls, 28 pitch external 60° “V”
SRVE-5P SPG-6000 UN Series Thread Rolls, 5 pitch external 60° “V”
SRVE-6P SPG-6000 UN Series Thread Rolls, 6 pitch external 60° “V”
SRVE-8P SPG-6000 UN Series Thread Rolls, 8 pitch external 60° “V”
SRVI-10P SPG-6000 UN Series Thread Rolls, 10 pitch internal 60° “V”
SRVI-11P SPG-6000 UN Series Thread Rolls, 11 pitch internal 60° “V”
SRVI-12P SPG-6000 UN Series Thread Rolls, 12 pitch internal 60° “V”
SRVI-13P SPG-6000 UN Series Thread Rolls, 13 pitch internal 60° “V”
SRVI-14P SPG-6000 UN Series Thread Rolls, 14 pitch internal 60° “V”
SRVI-16P SPG-6000 UN Series Thread Rolls, 16 pitch internal 60° “V”
SRVI-18P SPG-6000 UN Series Thread Rolls, 18 pitch internal 60° “V”
SRVI-20P SPG-6000 UN Series Thread Rolls, 20 pitch internal 60° “V”
SRVI-24P SPG-6000 UN Series Thread Rolls, 24 pitch internal 60° “V”
SRVI-28P SPG-6000 UN Series Thread Rolls, 28 pitch internal 60° “V”
SRVI-32P SPG-6000 UN Series Thread Rolls, 32 pitch internal 60° “V”
SRVI-6P SPG-6000 UN Series Thread Rolls, 6 pitch internal 60° “V”
SRVI-7P SPG-6000 UN Series Thread Rolls, 7 pitch internal 60° “V”
SRVI-8P SPG-6000 UN Series Thread Rolls, 8 pitch internal 60° “V”
SRVI-9P SPG-6000 UN Series Thread Rolls, 9 pitch internal 60° “V”
SSB-1055 Extension Shoe, .980” - 1.105”
SSB-1160 Extension Shoe, 1.085” – 1.210”
SSB-1265 Extension Shoe, 1.190” – 1.315”
SSB-1370 Extension Shoe, 1.295” – 1.420”
SSB-1475 Extension Shoe, 1.400” – 1.525”
SSB-1580 Extension Shoe, 1.505” – 1.630”
SSB-1685 Extension Shoe, 1.610” – 1.735”
SSB-1790 Extension Shoe, 1.715” – 1.840”
SSB-1895 Extension Shoe, 1.820” – 1.945”
SSB-2000 Extension Shoe, 1.925” – 2.050”
SSB-950 Extension Shoe, .875” - 1.000”
SSTD-B-BTC1 Box/Coupling Thread Size Standard for 4 1/2" - 7 5/8" Buttress Casing
SSTD-B-BTC2 Box/Coupling Thread Size Standard for 8 5/8" - 13 3/8" Buttress Casing
SSTD-B-EUE Box/Coupling Thread Size Standard for 2 3/8" - 4 1/2" EUE
SSTD-B-LP Box/Coupling Thread Size Standard for 2 1/2" - 10" Line Pipe
SSTD-B-LTC Box/Coupling Thread Size Standard for 4 1/2" - 9 5/8 LTC Casing
SSTD-B-NUE Box/Coupling Thread Size Standard for 2 3/8" - 4 1/2" NUE
SSTD-B-STC1 Box/Coupling Thread Size Standard for 4 1/2"- 7" STD Casing
SSTD-B-STC2 Box/Coupling Thread Size Standard for 7 5/8" - 9 5/8" STC Casing
SSTD-B-STC3 Box/Coupling Thread Size Standard for 10 3/4" - 13 3/8" STC Casing
SSTD-P-BTC1 Pin Thread Size Standard for 4 1/2" - 7 5/8" Buttress Casing
SSTD-P-BTC2 Pin Thread Size Standard for 8 5/8" - 13 3/8" Buttress Casing
SSTD-P-EUE Pin Thread Size Standard for 2 3/8" - 4 1/2" EUE
SSTD-P-LP Pin Thread Size Standard for 2 1/2" - 10" Line Pipe
SSTD-P-LTC Pin Thread Size Standard for 4 1/2" - 9 5/8 LTC Casing
SSTD-P-NUE Pin Thread Size Standard for 2 3/8" - 4 1/2" NUE
SSTD-P-STC1 Pin Thread Size Standard for 4 1/2"- 6 5/8 STD Casing
SSTD-P-STC2 Pin Thread Size Standard for 7" - 8 5/8" STC Casing
SSTD-P-STC3 Pin Thread Size Standard for 10 3/4" - 13 3/8" STC Casing
ST-7001 Standoff Gage w/ indicator and Setting Standard, .615” - .635”
ST-7002 RSC Standoff Gage to measure plug stand-in, .0005"resolution, 0" - .01" stand-in
Stator Bore Gage Calibration (all models)
STD-CR SBG Gage Round Setting Standard Cradle
STPA-375 Threaded contact point arms, .375” Diameter, 1.25” Long , MIn. Bore 1.032”
STPA-437 Threaded contact point arms, .437” Diameter, 1.50” Long, MIn. Bore 1.152”
STS-7001 Setting Standard Replacement, .625” width
T021 0.021” Dia. Contact Point
T028 0.028” Dia. Contact Point
T032 0.032” Dia. Contact Point
T032T 0.032” Dia. Contact Point, Truncated
T034 0.034” Dia. Contact Point
T041 0.041” Dia. Contact Point
T041T 0.041” Dia. Contact Point, Truncated
T043 0.043” Dia. Contact Point
T044 0.044” Dia. Contact Point
T045 0.045” Dia. Contact Point
T050 0.050” Dia. Contact Point
T050T 0.050” Dia. Contact Point, Truncated
T057 0.057” Dia. Contact Point
T059 0.059” Dia. Contact Point
T060 0.060” Dia. Contact Point
T062 0.062” Dia. Contact Point
T062L .062” Dia. Contact Point, Long Shank
T062T 0.062” Dia. Contact Point, Truncated
T068 0.068” Dia. Contact Point
T071 0.071” Dia. Contact Point
T072 0.072” Dia. Contact Point
T072L .072” Dia. Contact Point, Long Shank
T072T 0.072” Dia. Contact Point, Truncated
T079 .079” Dia. Contact Point
T082 0.082” Dia. Contact Point
T086 0.086” Dia. Contact Point
T087 0.087” Dia. Contact Point
T090 0.090” Dia. Contact Point
T090T 0.090” Dia. Contact Point, Truncated
T092 0.092” Dia. Contact Point
T095 .095” Dia. Contact Point
T096 0.096” Dia. Contact Point
T096L .096” Dia. Contact Point, Long Shank
T098 0.098” Dia. Contact Point
T1.00 1.00” Dia. Contact Point, Threaded Shank, Steel 
T1.500 1.500” Dia. Contact Point, Threaded Shank, Steel
T1.500 1.500” Dia. Contact Point, Threaded Shank, Steel
T100 0.100” Dia. Contact Point
T105 0.105” Dia. Contact Point
T105T 0.105” Dia. Contact Point, Truncated
T115 0.115” Dia. Contact Point
T116 0.116” Dia. Contact Point
T118 0.118” Dia. Contact Point
T125 0.125” Dia. Contact Point
T128 0.128” Dia. Contact Point
T128T 0.128” Dia. Contact Point, Truncated
T1335 0.1335” Dia. Contact Point
T144 0.144” Dia. Contact Point
T144T 0.144” Dia. Contact Point, Truncated
T150 0.150” Dia. Contact Point
T155 0.155” Dia. Contact Point
T156 0.156” Dia. Contact Point
T156T 0.156” Dia. Contact Point, Truncated
T157 0.157” Dia. Contact Point
T160 0.160” Dia. Contact Point
T165 0.165” Dia. Contact Point
T176 0.176” Dia. Contact Point
T1875 0.1875” Dia. Contact Point
T188 0.188” Dia. Contact Point
T188T 0.188” Dia. Contact Point, Truncated
T196 0.196” Dia. Contact Point
T2.5MM 2.5 MM CONTACT POINT
T200 0.200” Dia. Contact Point
T200L .200” Dia. Contact Point, Long Shank
T200T 0.200” Dia. Contact Point, Truncated
T219 0.219” Dia. Contact Point
T219T 0.219” Dia. Contact Point, Truncated
T235 0.235” Dia. Contact Point
T235T 0.235” Dia. Contact Point, Truncated
T250 0.250” Dia. Contact Point
T250VAM Special length shank, .250" Dia. Contact Point
T-25-40-125 0.125" diameter Special Cameron Ball Mic Contact points 
T-25-40-188 0.188" diameter Special Cameron Ball Mic Contact points 
T-25-40-250 0.250" diameter Special Cameron Ball Mic Contact points 
T-25-40-500 0.500" diameter Special Cameron Ball Mic Contact points 
T266 0.266” Dia. Contact Point
T266T 0.266” Dia. Contact Point, Truncated
T281 0.281" Dia. Contact Point
T288 0.288” Dia. Contact Point
T295 0.295” Dia. Contact Point
T300 0.300” Dia. Contact Point
T3125 0.3125” Dia. Contact Point
T325 0.325” Dia. Contact Point
T344 0.344” Dia. Contact Point
T344T 0.344” Dia. Contact Point, Truncated
T350 0.350” Dia. Contact Point
T360 0.360” Dia. Contact Point
T375 0.375” Dia. Contact Point
T4.0MM 4.0 MM CONTACT POINT
T430 0.430” Dia. Contact Point
T4375 0.4375” Dia. Contact Point
T475 0.475” Dia. Contact Point
T500 0.500” Dia. Contact Point
T500C 50° Cone, V -Threads, TH-3001V, TH-3002V, TH-3004
T500C-USS Contact Point, USS Improved Buttress
T501 50° Cone, Self-centering, TH-3001R, TH-3002R
T502 Self-centering sleeve for use with T501, T503
T503 50° Cone, V-Threads, TH-3006
T531 0.531” Dia. Contact Point
T531T 0.531” Dia. Contact Point, Truncated
T562 0.562” Dia. Contact Point
T625 0.625” Dia. Contact Point
T750 0.750” Dia. Contact Point
T875 .875” Dia. Contact Point
TBR-USS .020 R, Contact Point for BR-2001-USS
TDWIN Thread Disk software program,  single user
TDWIN-2USER Thread Disk software, 2 users, no license agreement required, 2 discs shipped, 20% discnt
TDWIN-LIC10 Thread Disk Software Network Version, 10 users, 47% discnt
TDWIN-LIC15 Thread Disk software license agreement, 15 users, 51% discnt
TDWIN-LIC5 Thread Disk Software Network Version, 5 users, 39% discnt
TDWINTaper Thread Disk for API Tapered Threads Software, single user
TDWINTaper-2USER TDWIN Taper, 2 users, no license agreement required, 2 drives shipped, 20% discnt
TDWINTaper-LIC10 TDWIN Taper Network version, 10 users, electronic logo required, 30% discnt
TDWINTaper-LIC5 TDWIN Taper Network  version, 5 users, electronic logo required, 20% discnt
TF-.5F Carbide Flat Face Setting Blocks (1.000” outside dim.)
TF-.75T ¾” Taper Blocks, 8 & 10 Round, ¾” TPF Buttress, Line Pipe
TF-__RSC Taper Blocks Calibration Service
TF-__T Taper Blocks Calibration Service
TF-1.0T 1” Taper Blocks, 1” TPF Buttress
TF-1.12T 1⅛” Taper Blocks, 1.125 TPF Connectors
TF-1.25RSC 1¼” Taper Blocks, 1.25 TPF Rotary Shouldered Connectors
TF-1.5RSC 1½” Taper Blocks, 1.50 TPF Rotary Shouldered Connectors
TF-1.75T 1¾” Taper Blocks, 1.75 TPF Connectors
TF-10 Tapered setting blocks 10° half angle
TF-15 Tapered setting blocks 15° half angle
TF-1A 2-3 pitch ACME/Stub ACME thread setting block
TF-1F Flat face setting block set (2 blocks) 1.5000” outside dimension
TF-1F, TF-2R-CAL Setting Blocks calibration
TF-1F-C Carbide flat face setting blocks (1.500” outside dim.)
TF-1F-T Flat face setting blocks to accept riser block (T-Shape)
TF-1V 3-5 pitch 60° “V” thread setting blocks
TF-2.0RSC 2” Taper Blocks, 2.0 TPF Rotary Shouldered Connectors
TF-20 Tapered setting blocks 20° half angle
TF-2A 4-20 pitch ACME/Stub ACME thread setting block
TF-2R ⅜” dia. carbide anvil set
TF-2V 6-20 pitch 60° “V” thread setting blocks
TF-3.0RSC 3” Taper Blocks, 3.0 TPF Rotary Shouldered Connectors
TF-30 Tapered setting blocks 30° half angle
TF-4.0RSC 4” Taper Blocks, 4.0 TPF Rotary Shouldered Connectors
TF-45 Tapered setting blocks 45° half angle
TF-BA Base support block for setting dial bore gages
TF-BI Base support plate for setting dial bore gages
TF-BX 23° BXR Ring Groove Diameter / Width Setting Blocks
TF-BX-Cal Setting Blocks calibration
TF-CA Caliper calibration accessory dial, digital and vernier calipers. Includes TF-SA support arm. 
TF-CG Universal clamping fixture for calibration of indicators and gages           
TF-CONE&V Fixture to calibrate cone & v setting Standard
TF-CP Ball contact holders, .500 ID measurement.
TF-CR Set of 3 fixtures for measuring cylindrical ring gages and bores.CR-1 (.170”-.249”), CR-2 (.250”-.879”), CR-3 (.880”-Larger)
TF-DG Fixture for calibrating depth micrometers
TF-IND AGD dial indicator calibration fixture (includes .375” and 8 mm bushing and TF-2F block)
TF-IT Internal threaded ring ball P.D. module (for solid style rings)
TF-LG-2 Lead gage calibration fixture for either Allen or Gagemaker gages
TF-LG-3 Lead gage calibration fixture
TF-PL Flat face Setting Blocks
TF-RISER1 1.00” Riser Block (Set of 2)
TF-RISER2 2.00” Riser Block (Set of 2)
TF-RISER3 3.00” Riser Block (Set of 2)
TF-RISER4 4.00” Riser Block (Set of 2)
TF-RISER5 5.00” Riser Block (Set of 2)
TF-SA Support Arm for TF-CA
TF-SB Adjustable height support table
TF-SB-1 Bearing Rail Support Base
TF-SP-5 For vertically holding gage pins .062 - .500
TF-SP-75 For vertically holding gage pins .062 - .750
TF-SS Straight support accessory for support of extended probes
TF-STR Straight Blocks
TF-SV V Support accessory for calibrating micrometers and Standard
TF-TI Test indicator calibration block 
TF-TP Calibration fixture for NPT, NPTF, and ANPT tapered plug gages, Includes wire for 27, 18, 14, & 11½ pitch threaded plugs.
TF-TP-CAL TF-TP Fixture calibration
TF-VB V block fixture for calibration of Gagemaker's TH-3004 and MRP-2002 Upper arms
TF-VN V blocks for calibration of axial travel probes and bore gages
TF-WH-__ Wire Holder Only, Per Wire Size
TF-WHA-__ 29° thread wire holder modules with wires 4 pitch to 20 pitch
TF-WHA-10 29° thread wire holder modules with wires 10 pitch
TF-WHA-12 29° thread wire holder modules with wires 12 pitch
TF-WHA-14 29° thread wire holder modules with wires 14 pitch
TF-WHA-16 29° thread wire holder modules with wires 4 pitch to 16 pitch
TF-WHA-18 29° thread wire holder modules with wires 18 pitch
TF-WHA-20 29° thread wire holder modules with wires 20 pitch
TF-WHA-4 29° thread wire holder modules with wires 4 pitch
TF-WHA-4.5 29° thread wire holder modules with wires 4½ pitch
TF-WHA-5 29° thread wire holder modules with wires 5 pitch
TF-WHA-5.5 29° thread wire holder modules with wires 5½ pitch
TF-WHA-6 29° thread wire holder modules with wires 6 pitch
TF-WHA-7 29° thread wire holder modules with wires 7 pitch
TF-WHA-8 29° thread wire holder modules with wires 8 pitch
TF-WHA-9 29° thread wire holder modules with wires 9 pitch
TF-WHAP-__ 29° thread wire holder modules with wires 2 to 3 pitch
TF-WHAP-2 29° thread wire holder modules with wires 2 pitch
TF-WHAP-3 29° thread wire holder modules with wires 3 pitch
TF-WHM-__ Metric thread wire holder modules with wires 1.0 mm -4.5mm pitch
TF-WHM-__ Metric thread wire holder modules with wires .5mm-.8mm, 5mm-6mm pitch
TF-WHV-__ 60° thread wire holder modules with wires 5 pitch to 48 pitch
TF-WHV-10 60° thread wire holder modules with wires 10 pitch
TF-WHV-11 60° thread wire holder modules with wires 11 pitch
TF-WHV-11½ 60° thread wire holder modules with wires 11½ pitch
TF-WHV-12 60° thread wire holder modules with wires 12 pitch
TF-WHV-13 60° thread wire holder modules with wires 13 pitch
TF-WHV-14 60° thread wire holder modules with wires 14 pitch
TF-WHV-16 60° thread wire holder modules with wires 16 pitch
TF-WHV-18 60° thread wire holder modules with wires 18 pitch
TF-WHV-20 60° thread wire holder modules with wires 20 pitch
TF-WHV-22 60° thread wire holder modules with wires 22 pitch
TF-WHV-24 60° thread wire holder modules with wires 24 pitch
TF-WHV-26 60° thread wire holder modules with wires 26 pitch
TF-WHV-27 60° thread wire holder modules with wires 27 pitch
TF-WHV-28 60° thread wire holder modules with wires 28 pitch
TF-WHV-30 60° thread wire holder modules with wires 30 pitch
TF-WHV-32 60° thread wire holder modules with wires 32 pitch
TF-WHV-36 60° thread wire holder modules with wires 36 pitch
TF-WHV-40 60° thread wire holder modules with wires 40 pitch
TF-WHV-44 60° thread wire holder modules with wires 44 pitch
TF-WHV-48 60° thread wire holder modules with wires 48 pitch
TF-WHV-6 60° thread wire holder modules with wires 6 pitch
TF-WHV-7 60° thread wire holder modules with wires 7 pitch
TF-WHV-7½ 60° thread wire holder modules with wires 7½ pitch
TF-WHV-8 60° thread wire holder modules with wires 8 pitch
TF-WHV-9 60° thread wire holder modules with wires 9 pitch
TF-WHVP-__ 60° thread wire holder modules with wires 1-4 pitch, 56-72 pitch
TF-WHVP-1 60° thread wire holder modules with wires 1 pitch
TF-WHVP-2 60° thread wire holder modules with wires 2 pitch
TF-WHVP-2.5 60° thread wire holder modules with wires 2½ pitch
TF-WHVP-2.75 60° thread wire holder modules with wires 2¾ pitch
TF-WHVP-3 60° thread wire holder modules with wires 3 pitch
TF-WHVP-3.25 60° thread wire holder modules with wires 3¼ pitch
TF-WHVP-3.5 60° thread wire holder modules with wires 3½ pitch
TF-WHVP-4 60° thread wire holder modules with wires 4 pitch
TF-WHVP-4.5 60° thread wire holder modules with wires 4½ pitch
TF-WHVP-5 60° thread wire holder modules with wires 5 pitch
TF-WHVP-5.5 60° thread wire holder modules with wires 5½ pitch
TF-WHVP-56 60° thread wire holder modules with wires 56 pitch
TF-WHVP-64 60° thread wire holder modules with wires 64 pitch
TF-WHVP-72 60° thread wire holder modules with wires 72 pitch
TF-WS Set of thread wire holder modules with wires for 6, 8,10,12,14,16,18, 20,24,28 and 32 pitch “V” threads (Requires TF-2R blocks)
TF-WSA Thread wire holder set. Contains wires and holders for 4, 5, 6, 8,10,12, 14 and 16 pitch Acme 29° threads (Requires TF-2R blocks)
TF-WSM Thread wire holder set. Contains wires and holders for .6,.75,1.0,1.25,1.5, 2.0,3.0,4.0 and 5.0 pitch Metric 60° threads (Requires TF-2R blocks)
TF-WSV Thread wire holder set. Contains wires and holders for 6, 8,10,12, 14, 16, 18, 20, 24, 28 and 32 pitch 60° threads (Requires TF-2R blocks)
TF-XYT Adjustable height, X axis & Y axis support base
TH-3000-RSC External Thread Height, 0-50-0, Tool Joint 
TH-3000-RSC-1 External Thread Height, 0-10-0, Tool Joint , .0001" Res. Indicator
TH-3000-USS USS Improved Buttress External Thread Height Gage with balanced dial and T500C-USS
TH-3001R External Thread Height, 0-100, 8-Round (T501)
TH-3001R-1 External Thread Height, 0-10-0, 8-Round (T501), .0001" Res. Indicator
TH-3001V External Thread Depth/Height gage, 0-100, UN, ACME, Stub ACME, Line Pipe (.196 travel), (Same as TH-3001PD)
TH-3001V-1 External Thread Depth/Height gage, 0-10-0, UN, ACME, Stub ACME, Line Pipe (.196 travel), .0001" Res. Indicator
TH-3002B External Thread Height Gage, 0-25-0, ¾” TPF Buttress (T072)
TH-3002B-1 External Thread Height Gage, 0-10-0, ¾” TPF Buttress (T072), .0001" Res. Indicator
TH-3002BB External Thread Height Base Only, ¾” TPF Buttress
TH-3002R External Thread Height Gage, 0-50-0, 8-Round (T501)
TH-3002R-1 External Thread Height Gage, 0-10-0, 8-Round (T501), .0001" Res. Indicator
TH-3002RB External Thread Height Base Only, 8-Round (T501)
TH-3002S External Thread Addendum (Shave) Gage, 0-50-0, 8 Round (T072), .196” Travel, 3.230” Min. Bore. 
TH-3002S External Thread Addendum (Shave) Gage, 0-25-0, 8-Round (T072), 1014S Standard required
TH-3002S-1 External Thread Addendum (Shave Gage), 0-10-0, 8-Round (T072), .0001" Res. Indicator, 1014S Standard required
TH-3002V External Thread Height Gage, 0-50-0, Line Pipe/Tool Joint
TH-3002V-1 External Thread Height Gage, 0-10-0, Line Pipe/Tool Joint, .0001" Res. Indicator
TH-3002VB External Thread Height Base Only, Line Pipe/Tool Joint
TH-3003B External Thread Height Gage, 0-25-0, Step Base, 1” Buttress
TH-3003B-1 External Thread Height Gage, 0-10-0, Step Base, 1” Buttress, .0001" Res. Indicator
TH-3003BB External Thread Height Base Only, 1” Buttress
TH-3004 Internal Thread Height Gage, 0-25-0, .0005, Line Pipe 
TH-3004-1 Internal Thread Height Gage, 0-10-0, .0001, Line Pipe, .0001" Res. Indicator
TH-3004DD Doug Dunford Special Clip Gage
TH-3004DD-1 Doug Dunford Special Clip Gage, .0001" Res. Indicator
TH-3006 Internal Thread Height Gage, 0-25-0, .0005, 8-Round  
TH-3006-1 Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator
TH-3008 Internal Thread Height Gage, 0-25-0, 8-Round  
TH-3008-1 Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator
TH-3009 Internal Thread Height/Depth Gage, 0-25-0, ¾” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), (Same as aTH-3009PD)
TH-3009-1 Internal Thread Height/Depth Gage, 0-10-0, ¾” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), .0001" Res. Indicator
TH-3009-RSC Internal Thread Height/Depth Gage, 0-25-0, 1” Base Length, Rotary Shouldered Connections 
TH-3009-RSC-1 Internal Thread Height/Depth Gage, 0-10-0, Rotary Shouldered Connections, .0001" Res. Indicator
TH-3010 Internal Thread Height Gage, 0-25-0, 1” Base Length 
TH-3010-USS USS Improved Buttress Internal Thread Height Gage with balanced dial and T500C-USS
TH-3012 Internal Thread Height Gage, 0-25-0 ¾” - 2” NPT
TH-3012-1 Internal Thread Height Gage, 0-10-0, ¾” - 2” NPT, .0001" Res. Indicator
Thread Data Chart Thread Data Chart
Thread Height Standard Calibration (except 1016 standard)
Thread Rolls Calibration
TI-ACME-INT Tapered Insert Identifier, Internal Acme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P,  and 16P
TI-RSC-60 Tapered Insert Identifiers V032, V038R, V040, V050, V055, V066, V076
TI-RSC-90 Tapered Insert Identifiers A-0.094, 90-V-0.050, 90-V-0.050, 90-V-0.084
TI-SACME-INT Tapered Insert Identifier, Internal StubAcme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P,  and 16P
TI-T&C Tapered Insert Identifier, 3/4" & 1" Tubing and Casing- 8 Round, 10 Round, Internal Buttress, and External Buttress
TM10-2-3 Special T-Micrometer  -  Base  10.00" wide -  Range 2" - 3"
TM11-2-3 Special T-Micrometer  -  Base  11.00" wide -  Range 2" - 3"
TM12-0-1 T-MIC for Rotor major diameter 0” - 1” with ½” wide x 12” long base
TM12-0-1-352 T-MIC for Rotor major diameter 0” - 1” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-0-25mm T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 12” long base, metric thimble
TM12-0-25mm-352 T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 12” long base, metric thimble
TM12-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-1-2 T-MIC for Rotor major diameter 1” - 2” with ½” wide x 12” long base
TM12-1-2-352 T-MIC for Rotor major diameter 1” - 2” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 12” long base, metric thimble
TM12-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 12” long base, metric thimble
TM12-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 12” long base, metric thimble
TM12-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 12” long base, metric thimble
TM12-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-2-3 T-MIC for Rotor major diameter 2” - 3” with ½” wide x 12” long base
TM12-2-3-352 T-MIC for Rotor major diameter 2” - 3” with ½” wide x 12” long baseand the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 12” long base, metric thimble
TM12-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-3-4 T-MIC for Rotor major diameter 3” - 4” with ½” wide x 12” long base
TM12-3-4-352 T-MIC for Rotor major diameter 3” - 4” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-4-5 T-MIC for Rotor major diameter 4” - 5” with ½” wide x 12” long base
TM12-4-5-352 T-MIC for Rotor major diameter 4” - 5” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 12” long base, metric thimble
TM12-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-5-6 T-MIC for Rotor major diameter 5” - 6” with ½” wide x 12” long base
TM12-5-6-352 T-MIC for Rotor major diameter 5” - 6” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-6-7 T-MIC for Rotor major diameter 6” - 7” with ½” wide x 12” long base
TM12-6-7-352 T-MIC for Rotor major diameter 6” - 7” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-75-100mm T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 12” long base, metric thimble
TM12-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM12-7-8 T-MIC for Rotor major diameter 7” - 8” with ½” wide x 12” long base
TM12-7-8-352 T-MIC for Rotor major diameter 7” - 8” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM12-8-9 T-MIC for Rotor major diameter 8” - 9” with ½” wide x 12” long base
TM12-8-9-352 T-MIC for Rotor major diameter 8” - 9” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM16-2-3 Special T-Micrometer  -  Base  16.00" wide -  Range 2" - 3"
TM18-0-1 T-MIC for Rotor major diameter 0” - 1” with ½” wide x 18” long base
TM18-0-1-352 T-MIC for Rotor major diameter 0” - 1” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-0-25mm T-MIC for Rotor major diameter 0 mm - 25mm with ½” wide x 18” long base, metric thimble
TM18-0-25mm-352 T-MIC for Rotor major diameter 0 mm - 25mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 18” long base, metric thimble
TM18-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-1-2 T-MIC for Rotor major diameter 1” - 2” with ½” wide x 18” long base
TM18-1-2-352 T-MIC for Rotor major diameter 1” - 2” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 18” long base, metric thimble
TM18-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 18” long base, metric thimble
TM18-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 18” long base, metric thimble
TM18-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 18” long base, metric thimble
TM18-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-2-3 T-MIC for Rotor major diameter 2” - 3” with ½” wide x 18” long base
TM18-2-3-352 T-MIC for Rotor major diameter 2” - 3” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 18” long base, metric thimble
TM18-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-3-4 T-MIC for Rotor major diameter 3” - 4” with ½” wide x 18” long base
TM18-3-4-352 T-MIC for Rotor major diameter 3” - 4” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-4-5 T-MIC for Rotor major diameter 4” - 5” with ½” wide x 18” long base
TM18-4-5-352 T-MIC for Rotor major diameter 4” - 5” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 18” long base, metric thimble
TM18-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-5-6 T-MIC for Rotor major diameter 5” - 6” with ½” wide x 18” long base
TM18-5-6-352 T-MIC for Rotor major diameter 5” - 6” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-6-7 T-MIC for Rotor major diameter 6” - 7” with ½” wide x 18” long base
TM18-6-7-352 T-MIC for Rotor major diameter 6” - 7” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-75-100mm T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 18” long base, metric thimble
TM18-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM18-7-8 T-MIC for Rotor major diameter 7” - 8” with ½” wide x 18” long base
TM18-7-8-352 T-MIC for Rotor major diameter 7” - 8” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM18-8-9 T-MIC for Rotor major diameter 8” - 9” with ½” wide x 18” long base
TM18-8-9-352 T-MIC for Rotor major diameter 8” - 9” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output.
TM20-2-3 Special T-Micrometer  -  Base  20.00" wide -  Range 2" - 3"
TM20-2-3-352 T-MIC for Rotor major diameter 2-3" with ½" wide x 20" long base and Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-0-1 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base
TM24-0-1-352 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-0-25 T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble
TM24-0-25mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-100-125 T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 24” long base, metric thimble
TM24-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-1-2 T-MIC for Rotor major diameter 1" - 2" with ½" wide x 24" long base
TM24-1-2-352 T-MIC for Rotor major diameter 1" - 2" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-125-150 T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 24” long base, metric thimble
TM24-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-150-175 T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 24” long base, metric thimble
TM24-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-175-200 T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 24” long base, metric thimble
TM24-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-200-225 T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 24” long base, metric thimble
TM24-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-2-3 T-MIC for Rotor major diameter 2" - 3" with ½" wide x 24" long base
TM24-2-3-352 T-MIC for Rotor major diameter 2" - 3" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble
TM24-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-3-4 T-MIC for Rotor major diameter 3" - 4" with ½" wide x 24" long base
TM24-3-4-352 T-MIC for Rotor major diameter 3" - 4" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-4-5 T-MIC for Rotor major diameter 4" - 5" with ½" wide x 24" long base
TM24-4-5-352 T-MIC for Rotor major diameter 4" - 5" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-50-75 T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 24” long base, metric thimble
TM24-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-5-6 T-MIC for Rotor major diameter 5" - 6" with ½" wide x 24" long base
TM24-5-6-352 T-MIC for Rotor major diameter 5" - 6" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-6-7 T-MIC for Rotor major diameter 6" - 7" with ½" wide x 24" long base
TM24-6-7-352 T-MIC for Rotor major diameter 6" - 7" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-75-100 T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 24” long base, metric thimble
TM24-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-7-8 T-MIC for Rotor major diameter 7" - 8" with ½" wide x 24" long base
TM24-7-8-352 T-MIC for Rotor major diameter 7" - 8" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM24-8-9 T-MIC for Rotor major diameter 8" - 9" with ½" wide x 24" long base
TM24-8-9-352 T-MIC for Rotor major diameter 8" - 9" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM27-2-3 T-MIC for Rotor major diameter 2" - 3" with ½" wide x 28" long base
TM3.5-0-1 Special T-Micrometer  -  Base  3.50" wide -  Range 0" - 1"    
TM3-0-1 Special T-Micrometer  -  Base 3.0" wide -  Range 0" - 1"
TM4.75-1-2 Special T-Micrometer  -  Base 4.75" wide -  Range 1" - 2" 
TM-4-1-144M T-MIC Micrometer Holder w/micrometer head (Mitutoyo flat anvil)
TM4-1-2 Special T-Micrometer  -  Base 4.00" wide -  Range 1" - 2" 
TM5.5-1-2 Special T-Micrometer  -  Base 5.50" wide -  Range 1" - 2" 
TM6-0-1 T-MIC for Rotor major diameter 0” - 1” with ½” wide x 6” long base
TM6-0-1-352 T-MIC for Rotor major diameter 0” - 1” with ½” wide x 6” long base
TM6-0-25mm T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 6” long base, metric thimble
TM6-0-25mm-352 T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 6” long base, metric thimble
TM6-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-1-2 T-MIC for Rotor major diameter 1” - 2” with ½” wide x 6” long base
TM6-1-2-352 T-MIC for Rotor major diameter 1” - 2” with ½” wide x 6” long base
TM6-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 6” long base, metric thimble
TM6-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 6” long base, metric thimble
TM6-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 6” long base, metric thimble
TM6-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 6” long base, metric thimble
TM6-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-2-3 T-MIC for Rotor major diameter 2” - 3” with ½” wide x 6” long base
TM6-2-3-352 T-MIC for Rotor major diameter 2” - 3” with ½” wide x 6” long base
TM6-25-50mm T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 6” long base, metric thimble
TM6-25-50mm-352 T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-3-4 T-MIC for Rotor major diameter 3” - 4” with ½” wide x 6” long base
TM6-3-4-352 T-MIC for Rotor major diameter 3” - 4” with ½” wide x 6” long base
TM6-4-5 T-MIC for Rotor major diameter 4” - 5” with ½” wide x 6” long base
TM6-4-5-352 T-MIC for Rotor major diameter 4” - 5” with ½” wide x 6” long base
TM6-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 6” long base, metric thimble
TM6-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-5-6 T-MIC for Rotor major diameter 5” - 6” with ½” wide x 6” long base
TM6-5-6-352 T-MIC for Rotor major diameter 5” - 6” with ½” wide x 6” long base
TM6-6-7 T-MIC for Rotor major diameter 6” - 7” with ½” wide x 6” long base
TM6-6-7-352 T-MIC for Rotor major diameter 6” - 7” with ½” wide x 6” long base
TM6-75-100mm T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 6” long base, metric thimble
TM6-75-100mm-352 T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM6-7-8 T-MIC for Rotor major diameter 7” - 8” with ½” wide x 6” long base
TM6-7-8-352 T-MIC for Rotor major diameter 7” - 8” with ½” wide x 6” long base
TM6-8-9 T-MIC for Rotor major diameter 8” - 9” with ½” wide x 6” long base
TM6-8-9-352 T-MIC for Rotor major diameter 8” - 9” with ½” wide x 6” long base
TM7.5-2-3 Special T-Micrometer  -  Base  7.50" wide -  Range 2" - 3"
TM8-0-1 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 8" long base
TM8-0-1-352 T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 8" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-0-25mm T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 8” long base, metric thimble
TM8-0-25mm-352 T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-100-125mm T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 8” long base, metric thimble
TM8-100-125mm-352 T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-1-2 T-MIC for Rotor major diameter 1" - 2" with ½" wide x 8" long base
TM8-1-2-352 T-MIC for Rotor major diameter 1" - 2" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-125-150mm T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 8” long base, metric thimble
TM8-125-150mm-352 T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-150-175mm T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 8” long base, metric thimble
TM8-150-175mm-352 T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-175-200mm T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 8” long base, metric thimble
TM8-175-200mm-352 T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-200-225mm T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 8” long base, metric thimble
TM8-200-225mm-352 T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-2-3 T-MIC for Rotor major diameter 2" - 3" with ½" wide x 8" long base
TM8-2-3-352 T-MIC for Rotor major diameter 2" - 3" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-25-50mm T-MIC for Rotor major diameter 25mm - 50 mm with ½” wide x 8” long base, metric thimble
TM8-25-50mm-352 T-MIC for Rotor major diameter 25mm - 50 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-3-4 T-MIC for Rotor major diameter 3" - 4"with ½" wide x 8" long base
TM8-3-4-352 T-MIC for Rotor major diameter 3" - 4" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-4-5 T-MIC for Rotor major diameter 4" - 5" with ½" wide x 8" long base
TM8-4-5-352 T-MIC for Rotor major diameter 4" - 5"  with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-50-75mm T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 8” long base, metric thimble
TM8-50-75mm-352 T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-5-6 T-MIC for Rotor major diameter 5" - 6" with ½" wide x 8" long base
TM8-5-6-352 T-MIC for Rotor major diameter 5" - 6"  with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-6-7 T-MIC for Rotor major diameter 6" - 7" with ½" wide x 8" long base
TM8-6-7-352 T-MIC for Rotor major diameter 6" - 7"  with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-75-100mm T-MIC for Rotor major diameter 75mm - 100 mm with ½” wide x 8” long base, metric thimble
TM8-75-100mm-352 T-MIC for Rotor major diameter 75mm - 100 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-7-8 T-MIC for Rotor major diameter 7" - 8" with ½" wide x 8" long base
TM8-7-8-352 T-MIC for Rotor major diameter 7" - 8"  with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM8-8-9 T-MIC for Rotor major diameter 8" - 9" with ½" wide x 8" long base
TM8-8-9-352 T-MIC for Rotor major diameter 8" - 9"  with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output
TM9-0-1 Special T-Micrometer  -  Base  9" wide -  Range 0" - 1"
TM9-2-3 Special T-Micrometer  -  Base  9" wide -  Range 2" - 3"
TP-11-1/2V Profile Gage-11½ V API Line Pipe, American Std. NPT, ¾” TPF, 11½  TPI, 11½ V Thread
TP-3.5-2-50 Profile Gage- 3½” - 6⅝” Hughes H-90, 2” TPF, 3.5 TPI, H-90
TP-3.5-3-50 Profile Gage- 7” - 8⅝” Hughes H-90, 3” TPF, 3.5 TPI, H-90
TP-3-1.25-84 Profile Gage- 2⅜” - 3½” Hughes Slim Line, 1.25” TPF, 3TPI, H-90
TP-4-1.5-76 Profile Gage- 2⅜” - 3½” P.A.C. Connections, 2⅜” - 4½” American Open Hole, 1.5” TPF, 4 TPI, V-0.076
TP-4-2-38 Profile Gage- 4” API Full Hole, 3½” - 5” Hughes Xtra Hole, 2⅜” - 4½” Hughes Slim Hole, 2⅜” - 6⅝” INT Flush, API Numbered Connections #23 - #50, 2” TPF, 4 TPI, V-0.038R
TP-4-2-38-H Profile Gage- 2⅞” Hughes Xtra Hole, 2” TPF, 4 TPI, V-0.038R
TP-4-2-50 Profile Gage- 6⅝” API REG, 5½” & 6⅝” API Full Hole, 2” TPF, 4 TPI, V-0.050
TP-4-3-38 Profile Gage- API Numbered Connections #56 - #77, 3” TPF, 4 TPI, V-0.038R
TP-4-3-50 Profile Gage- 5½”, 7⅝”, & 8⅝” API REG, 3” TPF, 4 TPI, V-0.050
TP-5-3-40 Profile Gage- 2⅜” - 4½” API REG, 3½” & 4½” API Full Hole, 3” TPF, 5 TPI, V-0.040
TP-5BTC1-EXT Profile Gage- API Buttress Casing, External, 16” - 20”, 1” TPF, 5 TPI 
TP-5BTC1-INT Profile Gage- API Buttress Casing, Internal, 16” - 20”, 1” TPF, 5 TPI
TP-5BTC75-EXT Profile Gage-API Buttress Casing, External, 4½” - 13⅜”, ¾” TPF, 5 TPI
TP-5BTC75-INT Profile Gage-API Buttress Casing, Internal, 4½” - 13⅜”, ¾” TPF, 5 TPI
TP-6-1.5-55 Profile Gage- API Numbered Connections #10, #12, #13, #16, M.T. (Macaroni Tubing), 1.5” TPF, 6 TPI, V-0.055
TP-6-2-32 Profile Gage- 2⅜" - 2⅞" Hughes External Flush, 2” TPF, 6 TPI, V-0.032
TP-745-10P Profile Gage-  7° x 45° Buttress, 10 TPI
TP-745-12P Profile Gage-  7° x 45° Buttress, 12 TPI
TP-745-16P Profile Gage-  7° x 45° Buttress, 16 TPI
TP-745-2P Profile Gage-  7° x 45° Buttress, 2 TPI
TP-745-3.5P Profile Gage-  7° x 45° Buttress, 3.5 TPI
TP-745-4P Profile Gage-  7° x 45° Buttress, 4 TPI
TP-745-6P Profile Gage-  7° x 45° Buttress, 6 TPI
TP-745-8P Profile Gage-  7° x 45° Buttress, 8 TPI
TP-8V Profile Gage- 8V API Line Pipe, American Std. NPT, ¾” TPF, 8 TPI, 8 V Thread
TP-9060LS 90° & 60° Threads, Tool Grinding & Setting Gage
TPD .020 R, Contact Point for Pit Depth Gage, PD-3003, PD-3004
TP-GPA-__P Internal/External general purpose ACME thread profile gage
TP-GPA-10P Internal/External general purpose ACME thread profile gage, 10 pitch
TP-GPA-12P Internal/External general purpose ACME thread profile gage, 12 pitch
TP-GPA-14P Internal/External general purpose ACME thread profile gage, 14 pitch
TP-GPA-16P Internal/External general purpose ACME thread profile gage, 16 pitch
TP-GPA-18P Internal/External general purpose ACME thread profile gage, 18 pitch
TP-GPA-1P Internal/External general purpose ACME thread profile gage, 1 pitch
TP-GPA-20P Internal/External general purpose ACME thread profile gage, 20 pitch
TP-GPA-25P Internal/External general purpose ACME thread profile gage, 2.5 pitch
TP-GPA-2P Internal/External general purpose ACME thread profile gage, 2 pitch
TP-GPA-35P Internal/External general purpose ACME thread profile gage, 3.5 pitch
TP-GPA-3P Internal/External general purpose ACME thread profile gage, 3 pitch
TP-GPA-4P Internal/External general purpose ACME thread profile gage, 4 pitch
TP-GPA-5P Internal/External general purpose ACME thread profile gage, 5 pitch
TP-GPA-6P Internal/External general purpose ACME thread profile gage, 6 pitch
TP-GPA-8P Internal/External general purpose ACME thread profile gage, 8 pitch
TP-ME-__P External ISO Metric series thread profile gage
TP-MI-__P Internal ISO Metric series thread profile gage
TP-NPT-11-1/2 NPT Threads, ¾” TPF, 11.5TPI
TP-NPT-14 NPT Threads, ¾” TPF, 14TPI
TP-NPT-8 NPT Threads, ¾” TPF, 8TPI
TP-RTC-10R All API 10R Tubing, ¾” TPF, 10 TPI 10 Round
TP-RTC-8R All API 8R Casing, Tubing & Drill Pipe, ¾” TPF, 8 TPI, 8 Round
TP-SA-__P Internal/external Stub ACME thread profile gage
TP-SA-10P Internal/external Stub ACME thread profile gage, 10 pitch
TP-SA-12P Internal/external Stub ACME thread profile gage, 12 pitch
TP-SA-14P Internal/external Stub ACME thread profile gage, 14 pitch
TP-SA-16P Internal/external Stub ACME thread profile gage, 16 pitch
TP-SA-18P Internal/external Stub ACME thread profile gage, 18 pitch
TP-SA-20P Internal/external Stub ACME thread profile gage, 20 pitch
TP-SA-4P Internal/external Stub ACME thread profile gage, 4 pitch
TP-SA-5P Internal/external Stub ACME thread profile gage, 5 pitch
TP-SA-6P Internal/external Stub ACME thread profile gage, 6 pitch
TP-SA-8P Internal/external Stub ACME thread profile gage, 8 pitch
TP-SAM1-4P Modified 1 Stub ACME thread profile gage, 4 pitch
TP-SAM1-5P Modified 1 Stub ACME thread profile gage, 5 pitch
TP-SAM1-6P Modified 1 Stub ACME thread profile gage, 6 pitch
TP-SAM2-__P Modified 2 Stub ACME thread profile gage, select pitch
TP-SAM2-10P Modified 2 Stub ACME thread profile gage,10pitch
TP-SAM2-12P Modified 2 Stub ACME thread profile gage, 12 pitch
TP-SAM2-14P Modified 2 Stub ACME thread profile gage, 14 pitch
TP-SAM2-16P Modified 2 Stub ACME thread profile gage, 16 pitch
TP-SAM2-18P Modified 2 Stub ACME thread profile gage, 18 pitch
TP-SAM2-20P Modified 2 Stub ACME thread profile gage, 20 pitch
TP-SAM2-4P Modified 2 Stub ACME thread profile gage, 4 pitch
TP-SAM2-5P Modified 2 Stub ACME thread profile gage, 5 pitch
TP-SAM2-6P Modified 2 Stub ACME thread profile gage, 6 pitch
TP-SAM2-8P Modified 2 Stub ACME thread profile gage, 8 pitch
TP-UNVE-__P External UN series thread profile gage
TP-UNVE-10P External UN series thread profile gage, 10 pitch
TP-UNVE-12P External UN series thread profile gage, 12 pitch
TP-UNVE-14P External UN series thread profile gage, 14 pitch
TP-UNVE-16P External UN series thread profile gage, 16 pitch
TP-UNVE-18P External UN series thread profile gage, 18 pitch
TP-UNVE-20P External UN series thread profile gage, 20 pitch
TP-UNVE-24P External UN series thread profile gage, 24 pitch
TP-UNVE-4P External UN series thread profile gage, 4 pitch
TP-UNVE-6P External UN series thread profile gage, 6 pitch
TP-UNVE-8P External UN series thread profile gage, 8 pitch
TP-UNVI-__P Internal UN series thread profile gage
TP-UNVI-10P Internal UN series thread profile gage, 10 pitch
TP-UNVI-12P Internal UN series thread profile gage, 12 pitch
TP-UNVI-14P Internal UN series thread profile gage, 14 pitch
TP-UNVI-16P Internal UN series thread profile gage, 16 pitch 
TP-UNVI-18P Internal UN series thread profile gage, 18 pitch
TP-UNVI-20P Internal UN series thread profile gage, 20 pitch 
TP-UNVI-24P Internal UN series thread profile gage, 24 pitch 
TP-UNVI-4P Internal UN series thread profile gage, 4 pitch
TP-UNVI-6P Internal UN series thread profile gage, 6 pitch
TP-UNVI-8P Internal UN series thread profile gage, 8 pitch
TP-USS-8P  Profile Gage- USS Improved Buttress
TR-10R MRP Thread Roll- All API 10 Round Tubing (Set of 2)
TR-11LP MRP Thread Roll- 11½ “V” API Line Pipe, American Std. NPT (Set of 2)
TR-312SLH9 MRP Thread Roll- 2⅜” - 3½” Hughes Slim Line (Set of 2)
TR-352H9 MRP Thread Roll- 3½” - 6⅝” Hughes H-90 (Set of 2)
TR-353H9 MRP Thread Roll- 7” - 8⅝” Hughes H-90 (Set of 2)
TR-41576 MRP Thread Roll- P.A.C. Connections, 2⅜” - 3½”, 2 “ - 4½” American Open Hole (Set of 2)
TR-4238 MRP Thread Roll- 4” API Full Hole, API Numbered Connections #23 - #50, 2⅞” - 5” Hughes Xtra Hole, 5½” & 6⅝” API Full Hole, 2⅜” - 4½” Hughes Slim Hole, 6⅝” API REG, 2⅜” - 5½” API INT Flush (Set of 2)
TR-4338 MRP Thread Roll- API Numbered Connections #56 - #77, 5½”, 7⅝”, & 8⅝” API REG (Set of 2)
TR-5340 MRP Thread Roll- 2⅜” - 4½” API REG, 3½” - 4½” API Full Hole
TR-61555 MRP Thread Roll- API Numbered Connections #10, #12, #13, #16M.T. (Macaroni Tubing) (Set of 2)
TR-6232 MRP Thread Roll- 2⅜” & 2⅞” External Flush (Set of 2)
TR-8LP MRP Thread Roll- 8V API Line Pipe, American Std. NPT (Set of 2)
TR-8R MRP Thread Roll- All API 8 Round Tubing (Set of 2)
TRA-10P Thread Roll- 10 pitch ACME (Set of 2)
TRA-12P Thread Roll- 12 pitch ACME (Set of 2)
TRA-14P Thread Roll- 14 pitch ACME (Set of 2)
TRA-16P Thread Roll- 16 pitch ACME (Set of 2)
TRA-18P Thread Roll- 18 pitch ACME (Set of 2)
TRA-2P Thread Roll- 2 pitch ACME (Set of 2)
TRA-3P Thread Roll- 3 pitch ACME (Set of 2)
TRA-4P Thread Roll- 4 pitch ACME (Set of 2)
TRA-5P Thread Roll- 5 pitch ACME (Set of 2)
TRA-6P Thread Roll- 6 pitch ACME (Set of 2)
TRA-8P Thread Roll- 8 pitch ACME (Set of 2)
TRAC-2012 CAL FL Calibration Mic Trac 2012 with Force Lok
TRAC-2012 CAL NF Calibration Mic Trac 2012 Non Force Lok 
TRAC-2012 with SLEC Calibration Mic Trac 2012 with SLEC file
TRAC-2024 CAL FL Calibration Mic Trac 2024 with Force Lok
TRAC-2024 CAL NF Calibration Mic Trac 2024 Non Force Lok
TRAC-2024 with SLEC Calibration Mic Trac 2024 with SLEC file
TRAC-2036 CAL FL Calibration Mic Trac 2036 with Force Lok
TRAC-2036 CAL NF Calibration Mic Trac 2036 Non Force Lok
TRAC-2036 with SLEC Calibration Mic Trac 2036 with SLEC file
TRAC-2048 CAL FL Calibration Mic Trac 2048 with Force Lok
TRAC-2048 CAL NF Calibration Mic Trac 2048 Non Force Lok
TRAC-2048 with SLEC Calibration Mic Trac 2048 with SLEC file
TRAC-2060 CAL FL Calibration Mic Trac 2060 with Force Lok
TRAC-2060 CAL NF Calibration Mic Trac 2060 Non Force Lok
Training Options A Option A: Training at customer’s facility (per day, plus airfare)
Training Options B Option B: Training at Gagemaker’s facility (per day, per person)
TR-B10E Thread Roll- API Buttress Casing, External, 16” - 20” (Set of 2)
TR-B10I Thread Roll- API Buttress Casing, Internal, 16” - 20” (Set of 2)
TRB745-10P Thread Roll- 10 pitch, 7°x 45° (Set of 2)
TRB745-12P Thread Roll- 12 pitch, 7°x 45° (Set of 2)
TRB745-16P Thread Roll- 16 pitch, 7°x 45° (Set of 2)
TRB745-2P Thread Roll- 2 pitch, 7°x 45° (Set of 2)
TRB745-3.5P Thread Roll- 3.5 pitch, 7°x 45° (Set of 2)
TRB745-3P Thread Roll- 3 pitch, 7°x 45° (Set of 2)
TRB745-4P Thread Roll- 4 pitch, 7°x 45° (Set of 2)
TRB745-5P Thread Roll- 5 pitch, 7°x 45° (Set of 2)
TRB745-6P Thread Roll- 6 pitch, 7°x 45° (Set of 2)
TRB745-8P Thread Roll- 8 pitch, 7°x 45° (Set of 2)
TR-B75 MRP Thread Roll- API Buttress Casing, 4½” - 13⅜” (Set of 2)
TR-BL Blank Thread roll set 
TRME-15P Thread Roll- 1.5mm pitch (Set of 2), External Metric
TRME-175P Thread Roll- 1.75mm pitch (Set of 2), External Metric
TRME-1P Thread Roll- 1mm pitch (Set of 2), External Metric
TRME-25P Thread Roll- 2.5mm pitch (Set of 2), External Metric
TRME-2P Thread Roll- 2mm pitch (Set of 2), External Metric
TRME-35P Thread Roll- 3.5mm pitch (Set of 2), External Metric
TRME-3P Thread Roll- 3mm pitch (Set of 2), External Metric
TRME-4P Thread Roll- 4mm pitch (Set of 2), External Metric
TRME-8P Thread Roll- 8mm pitch (Set of 2), External Metric
TRMI-125 Thread Roll- 1.25mm pitch (Set of 2), Internal Metric
TRMI-15P Thread Roll- 1.5mm pitch (Set of 2), Internal Metric
TRMI-175P Thread Roll- 1.75mm pitch (Set of 2), Internal Metric
TRMI-1P Thread Roll- 1mm pitch (Set of 2), Internal Metric
TRMI-25P Thread Roll- 2.5mm pitch (Set of 2), Internal Metric
TRMI-2P Thread Roll- 2mm pitch (Set of 2), Internal Metric
TRMI-35P Thread Roll- 3.5mm pitch (Set of 2), Internal Metric
TRMI-3P Thread Roll- 3mm pitch (Set of 2), Internal Metric
TRMI-4P Thread Roll- 4mm pitch (Set of 2), Internal Metric
TRMI-8P   Thread Roll- 8mm pitch (Set of 2), Internal Metric
TRSA-10P Thread Roll- 10 pitch Stub ACME (Set of 2)
TRSA-12P Thread Roll- 12 pitch Stub ACME (Set of 2)
TRSA-14P Thread Roll- 14 pitch Stub ACME (Set of 2)
TRSA-16P Thread Roll- 16 pitch Stub ACME (Set of 2)
TRSA-18P Thread Roll- 18 pitch Stub ACME (Set of 2)
TRSA-20P Thread Roll- 20 pitch Stub ACME (Set of 2)
TRSA-2P Thread Roll- 2 pitch Stub ACME (Set of 2)
TRSA-3P Thread Roll- 3 pitch Stub ACME (Set of 2)
TRSA-4P Thread Roll- 4 pitch Stub ACME (Set of 2)
TRSA-5P Thread Roll- 5 pitch Stub ACME (Set of 2)
TRSA-6P Thread Roll- 6 pitch Stub ACME (Set of 2)
TRSA-8P Thread Roll- 8 pitch Stub ACME (Set of 2)
TRSAM1-3P Thread Roll- 3 pitch Modified 1 Stub ACME (Set of 2)
TRSAM2-12P Thread Roll -12 Pitch Stub ACME Mod 2 (Set of 2)
TRSAM2-5P Thread Roll -5 Pitch Stub ACME Mod 2 (Set of 2)
TRT-10P Thread Roll- 10 mm pitch Trapezoidal (Set of 2)
TRT-12P Thread Roll- 12 mm pitch Trapezoidal (Set of 2)
TRT-2P Thread Roll- 2 mm pitch Trapezoidal (Set of 2)
TRT-3P Thread Roll- 3 mm pitch Trapezoidal (Set of 2)
TRT-4P Thread Roll- 4 mm pitch Trapezoidal (Set of 2)
TRT-5P Thread Roll- 5 mm pitch Trapezoidal (Set of 2)
TRT-6P Thread Roll- 6 mm pitch Trapezoidal (Set of 2)
TRT-8P Thread Roll- 8 mm pitch Trapezoidal (Set of 2)
TRT-9P Thread Roll- 9 mm pitch Trapezoidal (Set of 2)
TR-USS-8P USS Modified Buttress MRP Thread Roll. Supplied with Engr. Set-up Sheet for MIC TRAC Taper Block TF-75
TRVE-10P Thread Roll- 10 pitch external 60° “V” (Set of 2)
TRVE-12P Thread Roll- 12 pitch external 60° “V” (Set of 2)
TRVE-14P Thread Roll- 14 pitch external 60° “V” (Set of 2)
TRVE-16P Thread Roll- 16 pitch external 60° “V” (Set of 2)
TRVE-18P Thread Roll- 18 pitch external 60° “V” (Set of 2)
TRVE-20P Thread Roll- 20 pitch external 60° “V” (Set of 2)
TRVE-24P Thread Roll- 24 pitch external 60° “V” (Set of 2)
TRVE-28P Thread Roll- 28 pitch external 60° “V” (Set of 2)
TRVE-32P Thread Roll- 32 pitch external 60° “V” (Set of 2)
TRVE-4.5P Thread Roll- 4.5 pitch external 60° “V” (Set of 2)
TRVE-4P Thread Roll- 4 pitch external 60° “V” (Set of 2)
TRVE-5P Thread Roll- 5 pitch external 60° “V” (Set of 2)
TRVE-6P Thread Roll- 6 pitch external 60° “V” (Set of 2)
TRVE-8P Thread Roll- 8 pitch external 60° “V” (Set of 2)
TRVI-10P Thread Roll- 10 pitch internal 60° “V” (Set of 2)
TRVI-12P Thread Roll- 12 pitch internal 60° “V” (Set of 2)
TRVI-14P Thread Roll- 14 pitch internal 60° “V” (Set of 2)
TRVI-16P Thread Roll- 16 pitch internal 60° “V” (Set of 2)
TRVI-18P Thread Roll- 18 pitch internal 60° “V” (Set of 2)
TRVI-20P Thread Roll- 20 pitch internal 60° “V” (Set of 2)
TRVI-24P Thread Roll- 24 pitch internal 60° “V” (Set of 2)
TRVI-28P Thread Roll- 28 pitch internal 60° “V” (Set of 2)
TRVI-32P Thread Roll- 32 pitch internal 60° “V” (Set of 2)
TRVI-4.5P Thread Roll- 4.5 pitch internal 60° “V” (Set of 2)
TRVI-4P Thread Roll- 4 pitch internal 60° “V” (Set of 2)
TRVI-5P Thread Roll- 5 pitch internal 60° “V” (Set of 2)
TRVI-6P Thread Roll- 6 pitch internal 60° “V” (Set of 2)
TRVI-8P Thread Roll- 8 pitch internal 60° “V” (Set of 2)
TS-1/12-WP TS-4000 Wear Pad Assembly, 1/12"
TS-1/18-WP TS-4000 Wear Pad Assembly, 1/18"
TS-1000 Shoulder Location Gage, Base Length 6”, 6" Reach
TS-1000-1 Shoulder Location Gage, Base Length 6”, 6" Reach,.0001" Res. Indicator
TS-1001 Shoulder Location Gage, Base Length 12”, 10" Reach
TS-1001-1 Shoulder Location Gage, Base Length 12”, 10" Reach, .0001" Res. Indicator
TS-1001B TS-1001 Base only, Length 12”
TS-4000 Shoulder Depth Gage, 6.25" Reach (Specify Taper)
TS-5000 (TS-4000-VM) Shoulder Depth Gage, 7.5" Reach (Specify Taper)
TSS-1000 TS-1000 Setting Standard
TSS-4000 TS-4000 Setting Standard
TW-50 50 in-lb torque wrench w/ 5/32” hex wrench adapter
UP-MRP-2500 Upgrade MRP-2500 from old style to new style 
UP-MRP-5000 Upgrade MRP-5000 from old style to new style 
UP-SBG-0100E 0100E Hardware Upgrade, includes calibration and evaluation free (does not include a SBG-GIB or computer hardware upgrade)
UP-SBG-5000E 5000E Hardware Upgrade, includes calibration and evaluation free (does not include a SBG-GIB or computer hardware upgrade)

  苏州斯文克精密测量设备有限公司作为美国Gagemaker量仪的销售商，提供完整优惠的报价、便捷快速的维修售后服务，欢迎前来咨询。
标签：Gagemaker单项仪 进口Gagemaker 美国Gagemaker Gagemaker报价 Gagemaker测长仪
QQ客服
点击这里给我发消息