Mueller Gage-1400 SERIESPITCH DIAMETER GAGES | FOR GEARS, SPLINES, ALSO SPHERICAL AND GROOVE DIAMETERS | Adjustable Gage with interchangeable measuring tips will check the following: |  | Pitch diameter of splines and gears with even or uneven number of teeth, internal and external. |  | Concentricity of internal gears-pitch diameter to OD. |  | Concentricity of external gears-pitch diameter to ID. |  | Spherical diameters of ball races, internal and external. |  | Groove diameters, internal and external when used with our #1900 series measuring tips. |
|
 Model 1400 with slide and tips reversed to check external dimensions |  Model 1900-500 with long slide | Carbide contact balls are available from .050" to .505" diameter in .0001 " increments. Smaller and larger sizes available on special order at additional cost.
Standard inreach of #1400 tips is 1 1/4". Special 3 3/4" inreach tips available. Supplied with .0005" dial indicator only. Approximate weight of complete gage with tips is 22 oz.
Range slide easily reversed for checking OD's. |
|