 | Check ID's from .8" to 8.5" and OD's from .4" to 8.)" with 2 models. |
 | Fully adjustable gaging depth from 1/32" to 5/16" |
 | Five types standard interchangeable contact points available. Special contacts available too. |
 | Raised 3 point location rest pads stand gage 1/2" off part to clear hubs, shafts, etc. |
 | Two point contact |
 | Supplied with AGD Group 2 .0005" dial indicator with rev. counter. Not available with .0001 indicator |
 | For checking internal grooves, models 2002 and 2004 have .500" retraction Gaging direction changed in seconds. |
 | All contact and wear areas hardened and ground |
 | Easily set with gage blocks, ring gage, or qualified part. |
 | Fitted storage cases available. |
 | Gaging contacts can be rotated easily as they wear, greatly extending their useful life. |