产品详情
瑞典海克斯康Hexagon
美国Michigan花键量仪
德国Stotz进口气动量仪
King便携式布氏硬度计
Rex橡胶（邵氏）硬度计
美国GSG进口螺纹环塞规
Cameron 密封圈槽球规
美国Mueller Gage量仪
德国马尔量具│Mahr量仪
Universal美国环球量仪
德国IBR GmbH测控量仪
美国Gagemaker单项仪
美国Hemco石油螺纹规
日本三丰Mitutoyo量具
德国JBO螺纹规、丝锥
法国plastiform复印胶泥
Marposs 电子柱│传感器
Vermont螺纹规│光面规
Dorsey孔径量规│投影仪
美国Fowler量具仪器
Wrentham Tool Group
美国PMC石油螺纹规
昆山进口量规│测量仪器
日本测范社JPG螺纹规
瑞士WYLER AG电子仪器
TH-3002 Gagemaker
| TH-3000-RSC | External Thread Height, 0-50-0, Tool Joint |
| TH-3000-RSC-1 | External Thread Height, 0-10-0, Tool Joint , .0001" Res. Indicator |
| TH-3000-USS | USS Improved Buttress External Thread Height Gage with balanced dial and T500C-USS |
| TH-3001R | External Thread Height, 0-100, 8-Round (T501) |
| TH-3001R-1 | External Thread Height, 0-10-0, 8-Round (T501), .0001" Res. Indicator |
| TH-3001V | External Thread Depth/Height gage, 0-100, UN, ACME, Stub ACME, Line Pipe (.196 travel), (Same as TH-3001PD) |
| TH-3001V-1 | External Thread Depth/Height gage, 0-10-0, UN, ACME, Stub ACME, Line Pipe (.196 travel), .0001" Res. Indicator |
| TH-3002B | External Thread Height Gage, 0-25-0, ¾” TPF Buttress (T072) |
| TH-3002B-1 | External Thread Height Gage, 0-10-0, ¾” TPF Buttress (T072), .0001" Res. Indicator |
| TH-3002BB | External Thread Height Base Only, ¾” TPF Buttress |
| TH-3002R | External Thread Height Gage, 0-50-0, 8-Round (T501) |
| TH-3002R-1 | External Thread Height Gage, 0-10-0, 8-Round (T501), .0001" Res. Indicator |
| TH-3002RB | External Thread Height Base Only, 8-Round (T501) |
| TH-3002S | External Thread Addendum (Shave) Gage, 0-50-0, 8 Round (T072), .196” Travel, 3.230” Min. Bore. |
| TH-3002S | External Thread Addendum (Shave) Gage, 0-25-0, 8-Round (T072), 1014S Standard required |
| TH-3002S-1 | External Thread Addendum (Shave Gage), 0-10-0, 8-Round (T072), .0001" Res. Indicator, 1014S Standard required |
| TH-3002V | External Thread Height Gage, 0-50-0, Line Pipe/Tool Joint |
| TH-3002V-1 | External Thread Height Gage, 0-10-0, Line Pipe/Tool Joint, .0001" Res. Indicator |
| TH-3002VB | External Thread Height Base Only, Line Pipe/Tool Joint |
| TH-3003B | External Thread Height Gage, 0-25-0, Step Base, 1” Buttress |
| TH-3003B-1 | External Thread Height Gage, 0-10-0, Step Base, 1” Buttress, .0001" Res. Indicator |
| TH-3003BB | External Thread Height Base Only, 1” Buttress |
| TH-3004 | Internal Thread Height Gage, 0-25-0, .0005, Line Pipe |
| TH-3004-1 | Internal Thread Height Gage, 0-10-0, .0001, Line Pipe, .0001" Res. Indicator |
| TH-3004DD | Doug Dunford Special Clip Gage |
| TH-3004DD-1 | Doug Dunford Special Clip Gage, .0001" Res. Indicator |
| TH-3006 | Internal Thread Height Gage, 0-25-0, .0005, 8-Round |
| TH-3006-1 | Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator |
| TH-3008 | Internal Thread Height Gage, 0-25-0, 8-Round |
| TH-3008-1 | Internal Thread Height Gage, 0-10-0, 8-Round, .0001" Res. Indicator |
| TH-3009 | Internal Thread Height/Depth Gage, 0-25-0, ¾” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), (Same as aTH-3009PD) |
| TH-3009-1 | Internal Thread Height/Depth Gage, 0-10-0, ¾” TPF Buttress (T072) UN, ACME, Stub ACME (.250 travel), .0001" Res. Indicator |
| TH-3009-RSC | Internal Thread Height/Depth Gage, 0-25-0, 1” Base Length, Rotary Shouldered Connections |
| TH-3009-RSC-1 | Internal Thread Height/Depth Gage, 0-10-0, Rotary Shouldered Connections, .0001" Res. Indicator |
| TH-3010 | Internal Thread Height Gage, 0-25-0, 1” Base Length |
| TH-3010-USS | USS Improved Buttress Internal Thread Height Gage with balanced dial and T500C-USS |
| TH-3012 | Internal Thread Height Gage, 0-25-0 ¾” - 2” NPT |
| TH-3012-1 | Internal Thread Height Gage, 0-10-0, ¾” - 2” NPT, .0001" Res. Indicator |
| Thread Data Chart | Thread Data Chart |
| Thread Height Standard | Calibration (except 1016 standard) |
| Thread Rolls | Calibration |
| TI-ACME-INT | Tapered Insert Identifier, Internal Acme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P, and 16P |
| TI-RSC-60 | Tapered Insert Identifiers V032, V038R, V040, V050, V055, V066, V076 |
| TI-RSC-90 | Tapered Insert Identifiers A-0.094, 90-V-0.050, 90-V-0.050, 90-V-0.084 |
| TI-SACME-INT | Tapered Insert Identifier, Internal StubAcme- 3P, 3.5P, 4P, 5P, 6P, 8P, 10P, 12P, 14P, and 16P |
| TI-T&C | Tapered Insert Identifier, 3/4" & 1" Tubing and Casing- 8 Round, 10 Round, Internal Buttress, and External Buttress |
| TM10-2-3 | Special T-Micrometer - Base 10.00" wide - Range 2" - 3" |
| TM11-2-3 | Special T-Micrometer - Base 11.00" wide - Range 2" - 3" |
| TM12-0-1 | T-MIC for Rotor major diameter 0” - 1” with ½” wide x 12” long base |
| TM12-0-1-352 | T-MIC for Rotor major diameter 0” - 1” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-0-25mm | T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 12” long base, metric thimble |
| TM12-0-25mm-352 | T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-100-125mm | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 12” long base, metric thimble |
| TM12-100-125mm-352 | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-1-2 | T-MIC for Rotor major diameter 1” - 2” with ½” wide x 12” long base |
| TM12-1-2-352 | T-MIC for Rotor major diameter 1” - 2” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-125-150mm | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 12” long base, metric thimble |
| TM12-125-150mm-352 | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-150-175mm | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 12” long base, metric thimble |
| TM12-150-175mm-352 | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-175-200mm | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 12” long base, metric thimble |
| TM12-175-200mm-352 | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-200-225mm | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 12” long base, metric thimble |
| TM12-200-225mm-352 | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-2-3 | T-MIC for Rotor major diameter 2” - 3” with ½” wide x 12” long base |
| TM12-2-3-352 | T-MIC for Rotor major diameter 2” - 3” with ½” wide x 12” long baseand the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-25-50mm | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 12” long base, metric thimble |
| TM12-25-50mm-352 | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-3-4 | T-MIC for Rotor major diameter 3” - 4” with ½” wide x 12” long base |
| TM12-3-4-352 | T-MIC for Rotor major diameter 3” - 4” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-4-5 | T-MIC for Rotor major diameter 4” - 5” with ½” wide x 12” long base |
| TM12-4-5-352 | T-MIC for Rotor major diameter 4” - 5” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-50-75mm | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 12” long base, metric thimble |
| TM12-50-75mm-352 | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-5-6 | T-MIC for Rotor major diameter 5” - 6” with ½” wide x 12” long base |
| TM12-5-6-352 | T-MIC for Rotor major diameter 5” - 6” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-6-7 | T-MIC for Rotor major diameter 6” - 7” with ½” wide x 12” long base |
| TM12-6-7-352 | T-MIC for Rotor major diameter 6” - 7” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-75-100mm | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 12” long base, metric thimble |
| TM12-75-100mm-352 | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 12” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM12-7-8 | T-MIC for Rotor major diameter 7” - 8” with ½” wide x 12” long base |
| TM12-7-8-352 | T-MIC for Rotor major diameter 7” - 8” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM12-8-9 | T-MIC for Rotor major diameter 8” - 9” with ½” wide x 12” long base |
| TM12-8-9-352 | T-MIC for Rotor major diameter 8” - 9” with ½” wide x 12” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM16-2-3 | Special T-Micrometer - Base 16.00" wide - Range 2" - 3" |
| TM18-0-1 | T-MIC for Rotor major diameter 0” - 1” with ½” wide x 18” long base |
| TM18-0-1-352 | T-MIC for Rotor major diameter 0” - 1” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-0-25mm | T-MIC for Rotor major diameter 0 mm - 25mm with ½” wide x 18” long base, metric thimble |
| TM18-0-25mm-352 | T-MIC for Rotor major diameter 0 mm - 25mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-100-125mm | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 18” long base, metric thimble |
| TM18-100-125mm-352 | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-1-2 | T-MIC for Rotor major diameter 1” - 2” with ½” wide x 18” long base |
| TM18-1-2-352 | T-MIC for Rotor major diameter 1” - 2” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-125-150mm | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 18” long base, metric thimble |
| TM18-125-150mm-352 | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-150-175mm | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 18” long base, metric thimble |
| TM18-150-175mm-352 | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-175-200mm | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 18” long base, metric thimble |
| TM18-175-200mm-352 | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-200-225mm | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 18” long base, metric thimble |
| TM18-200-225mm-352 | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-2-3 | T-MIC for Rotor major diameter 2” - 3” with ½” wide x 18” long base |
| TM18-2-3-352 | T-MIC for Rotor major diameter 2” - 3” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-25-50mm | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 18” long base, metric thimble |
| TM18-25-50mm-352 | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-3-4 | T-MIC for Rotor major diameter 3” - 4” with ½” wide x 18” long base |
| TM18-3-4-352 | T-MIC for Rotor major diameter 3” - 4” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-4-5 | T-MIC for Rotor major diameter 4” - 5” with ½” wide x 18” long base |
| TM18-4-5-352 | T-MIC for Rotor major diameter 4” - 5” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-50-75mm | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 18” long base, metric thimble |
| TM18-50-75mm-352 | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-5-6 | T-MIC for Rotor major diameter 5” - 6” with ½” wide x 18” long base |
| TM18-5-6-352 | T-MIC for Rotor major diameter 5” - 6” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-6-7 | T-MIC for Rotor major diameter 6” - 7” with ½” wide x 18” long base |
| TM18-6-7-352 | T-MIC for Rotor major diameter 6” - 7” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-75-100mm | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 18” long base, metric thimble |
| TM18-75-100mm-352 | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 18” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM18-7-8 | T-MIC for Rotor major diameter 7” - 8” with ½” wide x 18” long base |
| TM18-7-8-352 | T-MIC for Rotor major diameter 7” - 8” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM18-8-9 | T-MIC for Rotor major diameter 8” - 9” with ½” wide x 18” long base |
| TM18-8-9-352 | T-MIC for Rotor major diameter 8” - 9” with ½” wide x 18” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output. |
| TM20-2-3 | Special T-Micrometer - Base 20.00" wide - Range 2" - 3" |
| TM20-2-3-352 | T-MIC for Rotor major diameter 2-3" with ½" wide x 20" long base and Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-0-1 | T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base |
| TM24-0-1-352 | T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-0-25 | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble |
| TM24-0-25mm-352 | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-100-125 | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 24” long base, metric thimble |
| TM24-100-125mm-352 | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-1-2 | T-MIC for Rotor major diameter 1" - 2" with ½" wide x 24" long base |
| TM24-1-2-352 | T-MIC for Rotor major diameter 1" - 2" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-125-150 | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 24” long base, metric thimble |
| TM24-125-150mm-352 | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-150-175 | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 24” long base, metric thimble |
| TM24-150-175mm-352 | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-175-200 | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 24” long base, metric thimble |
| TM24-175-200mm-352 | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-200-225 | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 24” long base, metric thimble |
| TM24-200-225mm-352 | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-2-3 | T-MIC for Rotor major diameter 2" - 3" with ½" wide x 24" long base |
| TM24-2-3-352 | T-MIC for Rotor major diameter 2" - 3" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-25-50mm | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble |
| TM24-25-50mm-352 | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-3-4 | T-MIC for Rotor major diameter 3" - 4" with ½" wide x 24" long base |
| TM24-3-4-352 | T-MIC for Rotor major diameter 3" - 4" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-4-5 | T-MIC for Rotor major diameter 4" - 5" with ½" wide x 24" long base |
| TM24-4-5-352 | T-MIC for Rotor major diameter 4" - 5" with 1/2" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-50-75 | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 24” long base, metric thimble |
| TM24-50-75mm-352 | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-5-6 | T-MIC for Rotor major diameter 5" - 6" with ½" wide x 24" long base |
| TM24-5-6-352 | T-MIC for Rotor major diameter 5" - 6" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-6-7 | T-MIC for Rotor major diameter 6" - 7" with ½" wide x 24" long base |
| TM24-6-7-352 | T-MIC for Rotor major diameter 6" - 7" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-75-100 | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 24” long base, metric thimble |
| TM24-75-100mm-352 | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 24” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-7-8 | T-MIC for Rotor major diameter 7" - 8" with ½" wide x 24" long base |
| TM24-7-8-352 | T-MIC for Rotor major diameter 7" - 8" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM24-8-9 | T-MIC for Rotor major diameter 8" - 9" with ½" wide x 24" long base |
| TM24-8-9-352 | T-MIC for Rotor major diameter 8" - 9" with ½" wide x 24" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM27-2-3 | T-MIC for Rotor major diameter 2" - 3" with ½" wide x 28" long base |
| TM3.5-0-1 | Special T-Micrometer - Base 3.50" wide - Range 0" - 1" |
| TM3-0-1 | Special T-Micrometer - Base 3.0" wide - Range 0" - 1" |
| TM4.75-1-2 | Special T-Micrometer - Base 4.75" wide - Range 1" - 2" |
| TM-4-1-144M | T-MIC Micrometer Holder w/micrometer head (Mitutoyo flat anvil) |
| TM4-1-2 | Special T-Micrometer - Base 4.00" wide - Range 1" - 2" |
| TM5.5-1-2 | Special T-Micrometer - Base 5.50" wide - Range 1" - 2" |
| TM6-0-1 | T-MIC for Rotor major diameter 0” - 1” with ½” wide x 6” long base |
| TM6-0-1-352 | T-MIC for Rotor major diameter 0” - 1” with ½” wide x 6” long base |
| TM6-0-25mm | T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 6” long base, metric thimble |
| TM6-0-25mm-352 | T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-100-125mm | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 6” long base, metric thimble |
| TM6-100-125mm-352 | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-1-2 | T-MIC for Rotor major diameter 1” - 2” with ½” wide x 6” long base |
| TM6-1-2-352 | T-MIC for Rotor major diameter 1” - 2” with ½” wide x 6” long base |
| TM6-125-150mm | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 6” long base, metric thimble |
| TM6-125-150mm-352 | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-150-175mm | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 6” long base, metric thimble |
| TM6-150-175mm-352 | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-175-200mm | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 6” long base, metric thimble |
| TM6-175-200mm-352 | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-200-225mm | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 6” long base, metric thimble |
| TM6-200-225mm-352 | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-2-3 | T-MIC for Rotor major diameter 2” - 3” with ½” wide x 6” long base |
| TM6-2-3-352 | T-MIC for Rotor major diameter 2” - 3” with ½” wide x 6” long base |
| TM6-25-50mm | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 6” long base, metric thimble |
| TM6-25-50mm-352 | T-MIC for Rotor major diameter 25 mm - 50 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-3-4 | T-MIC for Rotor major diameter 3” - 4” with ½” wide x 6” long base |
| TM6-3-4-352 | T-MIC for Rotor major diameter 3” - 4” with ½” wide x 6” long base |
| TM6-4-5 | T-MIC for Rotor major diameter 4” - 5” with ½” wide x 6” long base |
| TM6-4-5-352 | T-MIC for Rotor major diameter 4” - 5” with ½” wide x 6” long base |
| TM6-50-75mm | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 6” long base, metric thimble |
| TM6-50-75mm-352 | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-5-6 | T-MIC for Rotor major diameter 5” - 6” with ½” wide x 6” long base |
| TM6-5-6-352 | T-MIC for Rotor major diameter 5” - 6” with ½” wide x 6” long base |
| TM6-6-7 | T-MIC for Rotor major diameter 6” - 7” with ½” wide x 6” long base |
| TM6-6-7-352 | T-MIC for Rotor major diameter 6” - 7” with ½” wide x 6” long base |
| TM6-75-100mm | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 6” long base, metric thimble |
| TM6-75-100mm-352 | T-MIC for Rotor major diameter 75 mm - 100 mm with ½” wide x 6” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM6-7-8 | T-MIC for Rotor major diameter 7” - 8” with ½” wide x 6” long base |
| TM6-7-8-352 | T-MIC for Rotor major diameter 7” - 8” with ½” wide x 6” long base |
| TM6-8-9 | T-MIC for Rotor major diameter 8” - 9” with ½” wide x 6” long base |
| TM6-8-9-352 | T-MIC for Rotor major diameter 8” - 9” with ½” wide x 6” long base |
| TM7.5-2-3 | Special T-Micrometer - Base 7.50" wide - Range 2" - 3" |
| TM8-0-1 | T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 8" long base |
| TM8-0-1-352 | T-MIC for Rotor major diameter 0" - 1" with 1/2" wide x 8" long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-0-25mm | T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 8” long base, metric thimble |
| TM8-0-25mm-352 | T-MIC for Rotor major diameter 0 - 25 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-100-125mm | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 8” long base, metric thimble |
| TM8-100-125mm-352 | T-MIC for Rotor major diameter 100 mm - 125 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-1-2 | T-MIC for Rotor major diameter 1" - 2" with ½" wide x 8" long base |
| TM8-1-2-352 | T-MIC for Rotor major diameter 1" - 2" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-125-150mm | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 8” long base, metric thimble |
| TM8-125-150mm-352 | T-MIC for Rotor major diameter 125 mm - 150 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-150-175mm | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 8” long base, metric thimble |
| TM8-150-175mm-352 | T-MIC for Rotor major diameter 150 mm - 175 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-175-200mm | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 8” long base, metric thimble |
| TM8-175-200mm-352 | T-MIC for Rotor major diameter 175 mm - 200 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-200-225mm | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 8” long base, metric thimble |
| TM8-200-225mm-352 | T-MIC for Rotor major diameter 200 mm - 225 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-2-3 | T-MIC for Rotor major diameter 2" - 3" with ½" wide x 8" long base |
| TM8-2-3-352 | T-MIC for Rotor major diameter 2" - 3" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-25-50mm | T-MIC for Rotor major diameter 25mm - 50 mm with ½” wide x 8” long base, metric thimble |
| TM8-25-50mm-352 | T-MIC for Rotor major diameter 25mm - 50 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-3-4 | T-MIC for Rotor major diameter 3" - 4"with ½" wide x 8" long base |
| TM8-3-4-352 | T-MIC for Rotor major diameter 3" - 4" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-4-5 | T-MIC for Rotor major diameter 4" - 5" with ½" wide x 8" long base |
| TM8-4-5-352 | T-MIC for Rotor major diameter 4" - 5" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-50-75mm | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 8” long base, metric thimble |
| TM8-50-75mm-352 | T-MIC for Rotor major diameter 50 mm - 75 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-5-6 | T-MIC for Rotor major diameter 5" - 6" with ½" wide x 8" long base |
| TM8-5-6-352 | T-MIC for Rotor major diameter 5" - 6" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-6-7 | T-MIC for Rotor major diameter 6" - 7" with ½" wide x 8" long base |
| TM8-6-7-352 | T-MIC for Rotor major diameter 6" - 7" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-75-100mm | T-MIC for Rotor major diameter 75mm - 100 mm with ½” wide x 8” long base, metric thimble |
| TM8-75-100mm-352 | T-MIC for Rotor major diameter 75mm - 100 mm with ½” wide x 8” long base, metric thimble, and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-7-8 | T-MIC for Rotor major diameter 7" - 8" with ½" wide x 8" long base |
| TM8-7-8-352 | T-MIC for Rotor major diameter 7" - 8" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM8-8-9 | T-MIC for Rotor major diameter 8" - 9" with ½" wide x 8" long base |
| TM8-8-9-352 | T-MIC for Rotor major diameter 8" - 9" with ½” wide x 8” long base and the Mitutoyo 350-352-10 digital micrometer and SPC output |
| TM9-0-1 | Special T-Micrometer - Base 9" wide - Range 0" - 1" |
| TM9-2-3 | Special T-Micrometer - Base 9" wide - Range 2" - 3" |
| TP-11-1/2V | Profile Gage-11½ V API Line Pipe, American Std. NPT, ¾” TPF, 11½ TPI, 11½ V Thread |
| TP-3.5-2-50 | Profile Gage- 3½” - 6⅝” Hughes H-90, 2” TPF, 3.5 TPI, H-90 |
| TP-3.5-3-50 | Profile Gage- 7” - 8⅝” Hughes H-90, 3” TPF, 3.5 TPI, H-90 |
| TP-3-1.25-84 | Profile Gage- 2⅜” - 3½” Hughes Slim Line, 1.25” TPF, 3TPI, H-90 |
| TP-4-1.5-76 | Profile Gage- 2⅜” - 3½” P.A.C. Connections, 2⅜” - 4½” American Open Hole, 1.5” TPF, 4 TPI, V-0.076 |
| TP-4-2-38 | Profile Gage- 4” API Full Hole, 3½” - 5” Hughes Xtra Hole, 2⅜” - 4½” Hughes Slim Hole, 2⅜” - 6⅝” INT Flush, API Numbered Connections #23 - #50, 2” TPF, 4 TPI, V-0.038R |
| TP-4-2-38-H | Profile Gage- 2⅞” Hughes Xtra Hole, 2” TPF, 4 TPI, V-0.038R |
| TP-4-2-50 | Profile Gage- 6⅝” API REG, 5½” & 6⅝” API Full Hole, 2” TPF, 4 TPI, V-0.050 |
| TP-4-3-38 | Profile Gage- API Numbered Connections #56 - #77, 3” TPF, 4 TPI, V-0.038R |
| TP-4-3-50 | Profile Gage- 5½”, 7⅝”, & 8⅝” API REG, 3” TPF, 4 TPI, V-0.050 |
| TP-5-3-40 | Profile Gage- 2⅜” - 4½” API REG, 3½” & 4½” API Full Hole, 3” TPF, 5 TPI, V-0.040 |
| TP-5BTC1-EXT | Profile Gage- API Buttress Casing, External, 16” - 20”, 1” TPF, 5 TPI |
| TP-5BTC1-INT | Profile Gage- API Buttress Casing, Internal, 16” - 20”, 1” TPF, 5 TPI |
| TP-5BTC75-EXT | Profile Gage-API Buttress Casing, External, 4½” - 13⅜”, ¾” TPF, 5 TPI |
| TP-5BTC75-INT | Profile Gage-API Buttress Casing, Internal, 4½” - 13⅜”, ¾” TPF, 5 TPI |
| TP-6-1.5-55 | Profile Gage- API Numbered Connections #10, #12, #13, #16, M.T. (Macaroni Tubing), 1.5” TPF, 6 TPI, V-0.055 |
| TP-6-2-32 | Profile Gage- 2⅜" - 2⅞" Hughes External Flush, 2” TPF, 6 TPI, V-0.032 |
| TP-745-10P | Profile Gage- 7° x 45° Buttress, 10 TPI |
| TP-745-12P | Profile Gage- 7° x 45° Buttress, 12 TPI |
| TP-745-16P | Profile Gage- 7° x 45° Buttress, 16 TPI |
| TP-745-2P | Profile Gage- 7° x 45° Buttress, 2 TPI |
| TP-745-3.5P | Profile Gage- 7° x 45° Buttress, 3.5 TPI |
| TP-745-4P | Profile Gage- 7° x 45° Buttress, 4 TPI |
| TP-745-6P | Profile Gage- 7° x 45° Buttress, 6 TPI |
| TP-745-8P | Profile Gage- 7° x 45° Buttress, 8 TPI |
| TP-8V | Profile Gage- 8V API Line Pipe, American Std. NPT, ¾” TPF, 8 TPI, 8 V Thread |
| TP-9060LS | 90° & 60° Threads, Tool Grinding & Setting Gage |
| TPD | .020 R, Contact Point for Pit Depth Gage, PD-3003, PD-3004 |
| TP-GPA-__P | Internal/External general purpose ACME thread profile gage |
| TP-GPA-10P | Internal/External general purpose ACME thread profile gage, 10 pitch |
| TP-GPA-12P | Internal/External general purpose ACME thread profile gage, 12 pitch |
| TP-GPA-14P | Internal/External general purpose ACME thread profile gage, 14 pitch |
| TP-GPA-16P | Internal/External general purpose ACME thread profile gage, 16 pitch |
| TP-GPA-18P | Internal/External general purpose ACME thread profile gage, 18 pitch |
| TP-GPA-1P | Internal/External general purpose ACME thread profile gage, 1 pitch |
| TP-GPA-20P | Internal/External general purpose ACME thread profile gage, 20 pitch |
| TP-GPA-25P | Internal/External general purpose ACME thread profile gage, 2.5 pitch |
| TP-GPA-2P | Internal/External general purpose ACME thread profile gage, 2 pitch |
| TP-GPA-35P | Internal/External general purpose ACME thread profile gage, 3.5 pitch |
| TP-GPA-3P | Internal/External general purpose ACME thread profile gage, 3 pitch |
| TP-GPA-4P | Internal/External general purpose ACME thread profile gage, 4 pitch |
| TP-GPA-5P | Internal/External general purpose ACME thread profile gage, 5 pitch |
| TP-GPA-6P | Internal/External general purpose ACME thread profile gage, 6 pitch |
| TP-GPA-8P | Internal/External general purpose ACME thread profile gage, 8 pitch |
| TP-ME-__P | External ISO Metric series thread profile gage |
| TP-MI-__P | Internal ISO Metric series thread profile gage |
| TP-NPT-11-1/2 | NPT Threads, ¾” TPF, 11.5TPI |
| TP-NPT-14 | NPT Threads, ¾” TPF, 14TPI |
| TP-NPT-8 | NPT Threads, ¾” TPF, 8TPI |
| TP-RTC-10R | All API 10R Tubing, ¾” TPF, 10 TPI 10 Round |
| TP-RTC-8R | All API 8R Casing, Tubing & Drill Pipe, ¾” TPF, 8 TPI, 8 Round |
| TP-SA-__P | Internal/external Stub ACME thread profile gage |
| TP-SA-10P | Internal/external Stub ACME thread profile gage, 10 pitch |
| TP-SA-12P | Internal/external Stub ACME thread profile gage, 12 pitch |
| TP-SA-14P | Internal/external Stub ACME thread profile gage, 14 pitch |
| TP-SA-16P | Internal/external Stub ACME thread profile gage, 16 pitch |
| TP-SA-18P | Internal/external Stub ACME thread profile gage, 18 pitch |
| TP-SA-20P | Internal/external Stub ACME thread profile gage, 20 pitch |
| TP-SA-4P | Internal/external Stub ACME thread profile gage, 4 pitch |
| TP-SA-5P | Internal/external Stub ACME thread profile gage, 5 pitch |
| TP-SA-6P | Internal/external Stub ACME thread profile gage, 6 pitch |
| TP-SA-8P | Internal/external Stub ACME thread profile gage, 8 pitch |
| TP-SAM1-4P | Modified 1 Stub ACME thread profile gage, 4 pitch |
| TP-SAM1-5P | Modified 1 Stub ACME thread profile gage, 5 pitch |
| TP-SAM1-6P | Modified 1 Stub ACME thread profile gage, 6 pitch |
| TP-SAM2-__P | Modified 2 Stub ACME thread profile gage, select pitch |
| TP-SAM2-10P | Modified 2 Stub ACME thread profile gage,10pitch |
| TP-SAM2-12P | Modified 2 Stub ACME thread profile gage, 12 pitch |
| TP-SAM2-14P | Modified 2 Stub ACME thread profile gage, 14 pitch |
| TP-SAM2-16P | Modified 2 Stub ACME thread profile gage, 16 pitch |
| TP-SAM2-18P | Modified 2 Stub ACME thread profile gage, 18 pitch |
| TP-SAM2-20P | Modified 2 Stub ACME thread profile gage, 20 pitch |
| TP-SAM2-4P | Modified 2 Stub ACME thread profile gage, 4 pitch |
| TP-SAM2-5P | Modified 2 Stub ACME thread profile gage, 5 pitch |
| TP-SAM2-6P | Modified 2 Stub ACME thread profile gage, 6 pitch |
| TP-SAM2-8P | Modified 2 Stub ACME thread profile gage, 8 pitch |
| TP-UNVE-__P | External UN series thread profile gage |
| TP-UNVE-10P | External UN series thread profile gage, 10 pitch |
| TP-UNVE-12P | External UN series thread profile gage, 12 pitch |
| TP-UNVE-14P | External UN series thread profile gage, 14 pitch |
| TP-UNVE-16P | External UN series thread profile gage, 16 pitch |
| TP-UNVE-18P | External UN series thread profile gage, 18 pitch |
| TP-UNVE-20P | External UN series thread profile gage, 20 pitch |
| TP-UNVE-24P | External UN series thread profile gage, 24 pitch |
| TP-UNVE-4P | External UN series thread profile gage, 4 pitch |
| TP-UNVE-6P | External UN series thread profile gage, 6 pitch |
| TP-UNVE-8P | External UN series thread profile gage, 8 pitch |
| TP-UNVI-__P | Internal UN series thread profile gage |
| TP-UNVI-10P | Internal UN series thread profile gage, 10 pitch |
| TP-UNVI-12P | Internal UN series thread profile gage, 12 pitch |
| TP-UNVI-14P | Internal UN series thread profile gage, 14 pitch |
| TP-UNVI-16P | Internal UN series thread profile gage, 16 pitch |
| TP-UNVI-18P | Internal UN series thread profile gage, 18 pitch |
| TP-UNVI-20P | Internal UN series thread profile gage, 20 pitch |
| TP-UNVI-24P | Internal UN series thread profile gage, 24 pitch |
| TP-UNVI-4P | Internal UN series thread profile gage, 4 pitch |
| TP-UNVI-6P | Internal UN series thread profile gage, 6 pitch |
| TP-UNVI-8P | Internal UN series thread profile gage, 8 pitch |
| TP-USS-8P | Profile Gage- USS Improved Buttress |
| TR-10R | MRP Thread Roll- All API 10 Round Tubing (Set of 2) |
| TR-11LP | MRP Thread Roll- 11½ “V” API Line Pipe, American Std. NPT (Set of 2) |
| TR-312SLH9 | MRP Thread Roll- 2⅜” - 3½” Hughes Slim Line (Set of 2) |
| TR-352H9 | MRP Thread Roll- 3½” - 6⅝” Hughes H-90 (Set of 2) |
| TR-353H9 | MRP Thread Roll- 7” - 8⅝” Hughes H-90 (Set of 2) |
| TR-41576 | MRP Thread Roll- P.A.C. Connections, 2⅜” - 3½”, 2 “ - 4½” American Open Hole (Set of 2) |
| TR-4238 | MRP Thread Roll- 4” API Full Hole, API Numbered Connections #23 - #50, 2⅞” - 5” Hughes Xtra Hole, 5½” & 6⅝” API Full Hole, 2⅜” - 4½” Hughes Slim Hole, 6⅝” API REG, 2⅜” - 5½” API INT Flush (Set of 2) |
| TR-4338 | MRP Thread Roll- API Numbered Connections #56 - #77, 5½”, 7⅝”, & 8⅝” API REG (Set of 2) |
| TR-5340 | MRP Thread Roll- 2⅜” - 4½” API REG, 3½” - 4½” API Full Hole |
| TR-61555 | MRP Thread Roll- API Numbered Connections #10, #12, #13, #16M.T. (Macaroni Tubing) (Set of 2) |
| TR-6232 | MRP Thread Roll- 2⅜” & 2⅞” External Flush (Set of 2) |
| TR-8LP | MRP Thread Roll- 8V API Line Pipe, American Std. NPT (Set of 2) |
| TR-8R | MRP Thread Roll- All API 8 Round Tubing (Set of 2) |
| TRA-10P | Thread Roll- 10 pitch ACME (Set of 2) |
| TRA-12P | Thread Roll- 12 pitch ACME (Set of 2) |
| TRA-14P | Thread Roll- 14 pitch ACME (Set of 2) |
| TRA-16P | Thread Roll- 16 pitch ACME (Set of 2) |
| TRA-18P | Thread Roll- 18 pitch ACME (Set of 2) |
| TRA-2P | Thread Roll- 2 pitch ACME (Set of 2) |
| TRA-3P | Thread Roll- 3 pitch ACME (Set of 2) |
| TRA-4P | Thread Roll- 4 pitch ACME (Set of 2) |
| TRA-5P | Thread Roll- 5 pitch ACME (Set of 2) |
| TRA-6P | Thread Roll- 6 pitch ACME (Set of 2) |
| TRA-8P | Thread Roll- 8 pitch ACME (Set of 2) |
| TRAC-2012 CAL FL | Calibration Mic Trac 2012 with Force Lok |
| TRAC-2012 CAL NF | Calibration Mic Trac 2012 Non Force Lok |
| TRAC-2012 with SLEC | Calibration Mic Trac 2012 with SLEC file |
| TRAC-2024 CAL FL | Calibration Mic Trac 2024 with Force Lok |
| TRAC-2024 CAL NF | Calibration Mic Trac 2024 Non Force Lok |
| TRAC-2024 with SLEC | Calibration Mic Trac 2024 with SLEC file |
| TRAC-2036 CAL FL | Calibration Mic Trac 2036 with Force Lok |
| TRAC-2036 CAL NF | Calibration Mic Trac 2036 Non Force Lok |
| TRAC-2036 with SLEC | Calibration Mic Trac 2036 with SLEC file |
| TRAC-2048 CAL FL | Calibration Mic Trac 2048 with Force Lok |
| TRAC-2048 CAL NF | Calibration Mic Trac 2048 Non Force Lok |
| TRAC-2048 with SLEC | Calibration Mic Trac 2048 with SLEC file |
| TRAC-2060 CAL FL | Calibration Mic Trac 2060 with Force Lok |
| TRAC-2060 CAL NF | Calibration Mic Trac 2060 Non Force Lok |
| Training Options A | Option A: Training at customer’s facility (per day, plus airfare) |
| Training Options B | Option B: Training at Gagemaker’s facility (per day, per person) |
| TR-B10E | Thread Roll- API Buttress Casing, External, 16” - 20” (Set of 2) |
| TR-B10I | Thread Roll- API Buttress Casing, Internal, 16” - 20” (Set of 2) |
| TRB745-10P | Thread Roll- 10 pitch, 7°x 45° (Set of 2) |
| TRB745-12P | Thread Roll- 12 pitch, 7°x 45° (Set of 2) |
| TRB745-16P | Thread Roll- 16 pitch, 7°x 45° (Set of 2) |
| TRB745-2P | Thread Roll- 2 pitch, 7°x 45° (Set of 2) |
| TRB745-3.5P | Thread Roll- 3.5 pitch, 7°x 45° (Set of 2) |
| TRB745-3P | Thread Roll- 3 pitch, 7°x 45° (Set of 2) |
| TRB745-4P | Thread Roll- 4 pitch, 7°x 45° (Set of 2) |
| TRB745-5P | Thread Roll- 5 pitch, 7°x 45° (Set of 2) |
| TRB745-6P | Thread Roll- 6 pitch, 7°x 45° (Set of 2) |
| TRB745-8P | Thread Roll- 8 pitch, 7°x 45° (Set of 2) |
| TR-B75 | MRP Thread Roll- API Buttress Casing, 4½” - 13⅜” (Set of 2) |
| TR-BL | Blank Thread roll set |
| TRME-15P | Thread Roll- 1.5mm pitch (Set of 2), External Metric |
| TRME-175P | Thread Roll- 1.75mm pitch (Set of 2), External Metric |
| TRME-1P | Thread Roll- 1mm pitch (Set of 2), External Metric |
| TRME-25P | Thread Roll- 2.5mm pitch (Set of 2), External Metric |
| TRME-2P | Thread Roll- 2mm pitch (Set of 2), External Metric |
| TRME-35P | Thread Roll- 3.5mm pitch (Set of 2), External Metric |
| TRME-3P | Thread Roll- 3mm pitch (Set of 2), External Metric |
| TRME-4P | Thread Roll- 4mm pitch (Set of 2), External Metric |
| TRME-8P | Thread Roll- 8mm pitch (Set of 2), External Metric |
| TRMI-125 | Thread Roll- 1.25mm pitch (Set of 2), Internal Metric |
| TRMI-15P | Thread Roll- 1.5mm pitch (Set of 2), Internal Metric |
| TRMI-175P | Thread Roll- 1.75mm pitch (Set of 2), Internal Metric |
| TRMI-1P | Thread Roll- 1mm pitch (Set of 2), Internal Metric |
| TRMI-25P | Thread Roll- 2.5mm pitch (Set of 2), Internal Metric |
| TRMI-2P | Thread Roll- 2mm pitch (Set of 2), Internal Metric |
| TRMI-35P | Thread Roll- 3.5mm pitch (Set of 2), Internal Metric |
| TRMI-3P | Thread Roll- 3mm pitch (Set of 2), Internal Metric |
| TRMI-4P | Thread Roll- 4mm pitch (Set of 2), Internal Metric |
| TRMI-8P | Thread Roll- 8mm pitch (Set of 2), Internal Metric |
| TRSA-10P | Thread Roll- 10 pitch Stub ACME (Set of 2) |
| TRSA-12P | Thread Roll- 12 pitch Stub ACME (Set of 2) |
| TRSA-14P | Thread Roll- 14 pitch Stub ACME (Set of 2) |
| TRSA-16P | Thread Roll- 16 pitch Stub ACME (Set of 2) |
| TRSA-18P | Thread Roll- 18 pitch Stub ACME (Set of 2) |
| TRSA-20P | Thread Roll- 20 pitch Stub ACME (Set of 2) |
| TRSA-2P | Thread Roll- 2 pitch Stub ACME (Set of 2) |
| TRSA-3P | Thread Roll- 3 pitch Stub ACME (Set of 2) |
| TRSA-4P | Thread Roll- 4 pitch Stub ACME (Set of 2) |
| TRSA-5P | Thread Roll- 5 pitch Stub ACME (Set of 2) |
| TRSA-6P | Thread Roll- 6 pitch Stub ACME (Set of 2) |
| TRSA-8P | Thread Roll- 8 pitch Stub ACME (Set of 2) |
| TRSAM1-3P | Thread Roll- 3 pitch Modified 1 Stub ACME (Set of 2) |
| TRSAM2-12P | Thread Roll -12 Pitch Stub ACME Mod 2 (Set of 2) |
| TRSAM2-5P | Thread Roll -5 Pitch Stub ACME Mod 2 (Set of 2) |
| TRT-10P | Thread Roll- 10 mm pitch Trapezoidal (Set of 2) |
| TRT-12P | Thread Roll- 12 mm pitch Trapezoidal (Set of 2) |
| TRT-2P | Thread Roll- 2 mm pitch Trapezoidal (Set of 2) |
| TRT-3P | Thread Roll- 3 mm pitch Trapezoidal (Set of 2) |
| TRT-4P | Thread Roll- 4 mm pitch Trapezoidal (Set of 2) |
| TRT-5P | Thread Roll- 5 mm pitch Trapezoidal (Set of 2) |
| TRT-6P | Thread Roll- 6 mm pitch Trapezoidal (Set of 2) |
| TRT-8P | Thread Roll- 8 mm pitch Trapezoidal (Set of 2) |
| TRT-9P | Thread Roll- 9 mm pitch Trapezoidal (Set of 2) |
| TR-USS-8P | USS Modified Buttress MRP Thread Roll. Supplied with Engr. Set-up Sheet for MIC TRAC Taper Block TF-75 |
| TRVE-10P | Thread Roll- 10 pitch external 60° “V” (Set of 2) |
| TRVE-12P | Thread Roll- 12 pitch external 60° “V” (Set of 2) |
| TRVE-14P | Thread Roll- 14 pitch external 60° “V” (Set of 2) |
| TRVE-16P | Thread Roll- 16 pitch external 60° “V” (Set of 2) |
| TRVE-18P | Thread Roll- 18 pitch external 60° “V” (Set of 2) |
| TRVE-20P | Thread Roll- 20 pitch external 60° “V” (Set of 2) |
| TRVE-24P | Thread Roll- 24 pitch external 60° “V” (Set of 2) |
| TRVE-28P | Thread Roll- 28 pitch external 60° “V” (Set of 2) |
| TRVE-32P | Thread Roll- 32 pitch external 60° “V” (Set of 2) |
| TRVE-4.5P | Thread Roll- 4.5 pitch external 60° “V” (Set of 2) |
| TRVE-4P | Thread Roll- 4 pitch external 60° “V” (Set of 2) |
| TRVE-5P | Thread Roll- 5 pitch external 60° “V” (Set of 2) |
| TRVE-6P | Thread Roll- 6 pitch external 60° “V” (Set of 2) |
| TRVE-8P | Thread Roll- 8 pitch external 60° “V” (Set of 2) |
| TRVI-10P | Thread Roll- 10 pitch internal 60° “V” (Set of 2) |
| TRVI-12P | Thread Roll- 12 pitch internal 60° “V” (Set of 2) |
| TRVI-14P | Thread Roll- 14 pitch internal 60° “V” (Set of 2) |
| TRVI-16P | Thread Roll- 16 pitch internal 60° “V” (Set of 2) |
| TRVI-18P | Thread Roll- 18 pitch internal 60° “V” (Set of 2) |
| TRVI-20P | Thread Roll- 20 pitch internal 60° “V” (Set of 2) |
| TRVI-24P | Thread Roll- 24 pitch internal 60° “V” (Set of 2) |
| TRVI-28P | Thread Roll- 28 pitch internal 60° “V” (Set of 2) |
| TRVI-32P | Thread Roll- 32 pitch internal 60° “V” (Set of 2) |
| TRVI-4.5P | Thread Roll- 4.5 pitch internal 60° “V” (Set of 2) |
| TRVI-4P | Thread Roll- 4 pitch internal 60° “V” (Set of 2) |
| TRVI-5P | Thread Roll- 5 pitch internal 60° “V” (Set of 2) |
| TRVI-6P | Thread Roll- 6 pitch internal 60° “V” (Set of 2) |
| TRVI-8P | Thread Roll- 8 pitch internal 60° “V” (Set of 2) |
| TS-1/12-WP | TS-4000 Wear Pad Assembly, 1/12" |
| TS-1/18-WP | TS-4000 Wear Pad Assembly, 1/18" |
| TS-1000 | Shoulder Location Gage, Base Length 6”, 6" Reach |
| TS-1000-1 | Shoulder Location Gage, Base Length 6”, 6" Reach,.0001" Res. Indicator |
| TS-1001 | Shoulder Location Gage, Base Length 12”, 10" Reach |
| TS-1001-1 | Shoulder Location Gage, Base Length 12”, 10" Reach, .0001" Res. Indicator |
| TS-1001B | TS-1001 Base only, Length 12” |
| TS-4000 | Shoulder Depth Gage, 6.25" Reach (Specify Taper) |
| TS-5000 | (TS-4000-VM) Shoulder Depth Gage, 7.5" Reach (Specify Taper) |
| TSS-1000 | TS-1000 Setting Standard |
| TSS-4000 | TS-4000 Setting Standard |
| TW-50 | 50 in-lb torque wrench w/ 5/32” hex wrench adapter |
| UP-MRP-2500 | Upgrade MRP-2500 from old style to new style |
| UP-MRP-5000 | Upgrade MRP-5000 from old style to new style |
| UP-SBG-0100E | 0100E Hardware Upgrade, includes calibration and evaluation free (does not include a SBG-GIB or computer hardware upgrade) |
| UP-SBG-5000E | 5000E Hardware Upgrade, includes calibration and evaluation free (does not include a SBG-GIB or computer hardware upgrade) |
| WOOD-A | Wooden Case, 54” X 17” X 3.5”, with foam |
| WOOD-B | Wooden Case, 48” X 10” X 3.5”, with foam |
| WOOD-B-1 | Wooden Case, 46” X 26” X 3.5”, with foam |
| WOOD-C | Wooden Case, 44” X 8” X 3.5”, with foam |
| WOOD-D | Wooden Case, 42” X 24” X 3.5”, with foam |
| WOOD-E | Wooden Case, 42” X 10” X 3.5”, with foam |
| WOOD-F | Wooden Case, 35” X 12” X 3.5”, with foam |
| WOOD-G | Wooden Case, 34” X 10” X 3.5”, with foam |
| WOOD-H | Wooden Case, 34” X 8” X 3.5”, with foam |
| WOOD-I | Wooden Case, 33” X 21” X 3.5”, with foam |
| WOOD-J | Wooden Case, 27” X 10” X 3.5”, with foam |
| WOOD-J-1 | Wooden Case, 27” X 9” X 3.5”, with foam |
| WOOD-K | Wooden Case, 26” X 15” X 3.5”, with foam |
| WOOD-L | Wooden Case, 25” X 10” X 3.5”, with foam |
| WOOD-M | Wooden Case, 22” X 12” X 3.5”, with foam |
| WOOD-N | Wooden Case, 22” X 8” X 3.5”, with foam |
| WOOD-O | Wooden Case, 21” X 8” X 3.5”, with foam |
| WOOD-P | Wooden Case, 17” X 10” X 3.5”, with foam |
| WOOD-Q | Wooden Case, 15” X 15” X 3.5”, with foam |
| WT-9001 | Wall Thickness Gage, 2⅜” - 4½” |
| WT-9002 | Wall Thickness Gage, 4½” - 9⅝” |
| WT-9003 | Wall Thickness Gage, 4½” - 13⅜” |
美国gagemaker螺纹量仪，货期4-6周，部分现货，价格全国最低。
