概述
l 复制模式中的无损控制
l 该产品允许复制成型的、复杂的内部机械零件，然后可以通过使用光学、非接触式测量设备查看和检查。
l 该产品和添加剂包含两个部分，必须使用适当的比例混合以确保正确的聚合作用。
l 在应用该产品之前，复制测试对象时应保证完全清洁并且不油腻。
KVAD●胶粘剂一致性最适合成型的内部，外部和部门复制中小尺寸。手动应用。低弹性（从1％到2％的核心）可以方便的复制成型和轻松删除。也适合于印刷机械。可以很容易被切割。
产品性能
产品型号 | LK-AD | |
稠度 | 胶粘剂 | |
颜色 | 灰色+白色 | |
气味 | 无 | |
在20摄氏度时的聚合时间 | 8分钟 | |
支撑柱A硬度 | 70/75 | |
弹性 | 几乎没有弹性 | |
密度 |
1，6 | |
容量 | 两盒装（A+B）,450ml每盒 | |
标准配件 | 手柄（2个） |
Description
With its Putty initial consistency (modelling clay), the M70 can be applied manually on vertical or overhead surfaces.
The final impression is Semi-Flexible (70 Shore A hardness), and has no strong capacity to be deformed ans strectched. It only accepts 5% Removal Constraint.
The M70 is recommended for taking impressions of external simple forms on parts of large or medium sizes.
It can also be used to create custom-made fixing platforms to fix and maintain fragile or complex parts.
Applications
The M70 is suitable for the following applications :
- External impressions of simple forms
- Fix, Clamp and Maintain parts
MeASUREMENT OF THE IMPRESSION
Because the impression is soft and very flexible, it is controlled without contact, using a visual measuring instrument (profile projector, microscope, optical measuring instrument...).
But the best way to control it is to use the PLASTIFORM® Twin Blade Cutter to create a slice, and measure the dimensions of the slice on a profile projector.
PACKAGINGS
The M70 is available in the following packagings :
PotS 900 ml
- 2 pots of 450 ml (MT-003)
苏州斯文克精密测量设备有限公司专业代理M70印模胶泥，代理法国进口石油螺纹测量复制胶泥，进口打样胶泥、同时代理美国GSG石油螺纹量规、API 石油螺纹规、schwenk孔径量仪等，期待合作。
